XML

Archived from groups: rec.games.video.arcade.collecting (More info?) I'm getting out of the hobby for a number of reasons. My basement arcade is history. http://www.ourvictorianhouse.com/CraigsArcade/Index.htm. I will be selling off my machines one at a time as I get the time. Here are the...

Archived from groups: microsoft.public.windowsxp.hardware (More info?) Greetings, After 12 months of flawless operation and not a single BSOD. I have encountered a problem with Windows XP pro. During a network setup wizard procedure in XP pro the system required a restart after the network...

Archived from groups: microsoft.public.windowsxp.help_and_support (More info?) I've read the KB articles for troubleshooting WI problems, but they have been of no help. I'm running WinXP Pro (SP-2) with all updates. Whenever something needs Installer, I get some variant of: "The Windows...

Hi folks, I've wondered about this for a while, and decided to ask here. I recently purchased a Gigabyte 7970 Ghz Ed card. It's beautiful and runs flawless with two exceptions... With Crysis 3 all settings maxed I get as low as 15 fps rendering it unplayable. If I back off the MSAA to 4x it...

Archived from groups: microsoft.public.windowsxp.hardware (More info?) Here's a loverly one. Knowledgable friend lost both kb and mouse on one of his old machines. He couldn't get to base one, so I said, "Sure, bring it over." Now I have egg on my face, too. It's a junker Cel466 Dell...

Archived from groups: alt.sys.pc-clone.dell (More info?) Hi All: I have a Dell Dimension XPS T600 desktop with Windows XP. I just replaced the original Seagate 28.5 GB hard drive with a new Seagate Barracude ATA 200 GB drive (Model ST3200822A) and installed Windows XP including service pack...

hey guys, i need your help... is it possible to switch back from windows 8 to windows 7? because i can't play darksiders 1&2 cod: black ops2 and left for dead... and it lag every time.... thanks....

OK, here is the performance update to why your 12-volt video cards won't run. Since everyone likes to talk and voice opinions, but provide little hard evidence to evaluate problems I decided to do just the opposite. I bought both power supplies and put two "good" supplies head to head in the...

Dear Group - any suggestions would be greatly appreciated. Really need my printer right now. Operating system: Windows XP service pack 3 Printer was working fine and just quit. Checked numerous times to make sure there was not any small bits of torn paper stuck anywhere Attention light, Ready...

Hello, How do I disable "Secure Boot" in windows 8. The selection is grey and I can't change it.

I am looking to buy a i5 2500k with a motherboard that supports overclocking for around $290 -$300. must have 4x memory slots. It can be used if it works.

Hey guys and experts Am looking into getting a latitude 10 tablet and was wondering if any of you have any idea about the HSPA wwan card used in it .would i be able to use a nonUS service provider with while overseas ? Thier customer service blows didnt even know it had one !!! Appreciate your...

Hello I'm purchasing parts for my first PC build. First here is the parts list http://pcpartpicker.com/p/24x7E First if there are any tweaks or suggestions for the build let me know. Quick thing on my build, yes I know the cpu is more than I need for gaming, I wanted it to be somewhat future...

So, Since my last post might have been a little confusing: Approximate Purchase Date: within the next 2-3 weeks Budget Range: 125-175 euros Monitor Usage from Most to Least Important: Gaming, Video editting, Surfing, watching movies Preferred Website(s) for Parts: afuture (Dutch) Country...

Hello, I can't recieve faxes with my MP780. It was working fine until I moved offices. Bell Canada says the line is ok, the probelem is the machine does not recognize the incoming fax. I'm not sure what to do. Help!

ok

I'm having a problem with a printer shared out from my networks print server. The printer is an HP 4250N. I have about 6 or 7 of them on my network and this is the only one that has been causing problems lately. I can print to from it fine on my account (a network administrator account) and...

Hi i am deciding between two monitors: -Samsung t240 or -Samsung t260 They are pretty much the same except for the t260 is 25.5 inches and the t240 is 24. Will the t260 image quality look worse than the t240 because it is the same rez but bigger size so the pixels stretch? Or is is not even...

So I have to buy a new monitor today or tomorrow. These ViewSonic are really cheap, they all cost the same price in my area. Which of the three should I buy? Using mostly for desktop and gaming, some movies as well. The models are: VA1912wb (19" Widescreen) VA902b (19" 4x3) VG2021M (20" 4x3)...

Archived from groups: comp.periphs.printers (More info?) Having problems with my Epson Printer and decided to try the SSC Service Utility that was recommended in a number of usenet and web forum postings. It was found at http://www.ssclg.com/epsone.shtml. When I tried to install it, Avast...

Archived from groups: alt.comp.periphs.multifunctions,comp.periphs.printers (More info?) Please see my new tribute to Lexmark X73... and just in time for Christmas too!! http://www.geocities.com/lexmark8792/tribute.html Fred, President Lexmark X73 Fan Club "Over 2 members worldwide!" (Both...

Archived from groups: alt.comp.periphs.webcam (More info?) Has anyone had experience with water spots (actually preventing) on dome cameras? I have a Vicon Surveyor and after a rainstorm I get some water spots that are annoying as the camera is not readily accessible to clean. Have you tried...

Archived from groups: comp.periphs.printers (More info?) I've got a Lexmark E210, which is a rebranded version of the Samsung 1210. I'm probably midway into my first full toner cart (the first was the half-cart thatat comes with the printer) and have had no problems. Considering the cost, I'm...

Archived from groups: comp.periphs.printers (More info?) I have recently acquired an old canon bj200 inkjet printer. It works fine, but if I leave it for a day the jets block such that I have to run the head under the hot tap. It then works fine. I notice that in the printer all the print head...

Hi, I own a mitsubishi 2070sb, but at the 1600*1200 resolution it is more blurry at top and bottom of screen than in the middle. I don't find any controls to solve that. I use 85Hz now but going to 75 or 70 doesn't solve it either. It should easily manage 1600*1200 at 85Hz. My system is dual...

Archived from groups: comp.periphs.printers (More info?) I need to make a quick decision between the two printers and I'm hoping someone can answer a few qustions: 1. Can the R800 print the full 11" length of a 8.5" x 11" page (a border on the width is not important). I need to be able to...

Archived from groups: microsoft.public.windowsxp.print_fax (More info?) Please can some help three weeks ago I had a virus on my system could not drag or drop or burn anything to cd so I decided to re-load xp in a different section having done this I copied everything that I needed and...

Hello, hey, Hey, I have an Acer aspire desktop PC and I cant boot from CD/DVD even if I set the first boot device as cd rom in the bios, or even select the boot option (F12). what could be the course of this as I also tried to load default BIOS.

Archived from groups: microsoft.public.windowsxp.hardware (More info?) Hi, Can anyone tell me the difference between DVD +R, -R, +RW and -RW? Can I burn a DVD -R/-RW in a DVD +R/+RW burner and vice versa? Thanks in Advance. RY.

Hello, My computer boots up and logs into the administrator user account without asking for password

Archived from groups: microsoft.public.windowsxp.hardware (More info?) my mouse wheel no longer scrolls when i turn it, instead it acts like the back button and goes to the previous page. i am not running any programs for the mouse. i guess the issue is how do you remap mouse buttons?

Hello,I can't find my start button or the clock

Archived from groups: microsoft.public.win2000.general,microsoft.public.windows.inetexplorer.ie6.browser (More info?) fter several months of having no problems updating Windows 2000 pro,my browser consistently stops at this point (it doesn't hang but just finishes): "Windows Update is...

Archived from groups: microsoft.public.win2000.general (More info?) I have a number of Win2k servers and would like to monitor the "Print Spooler" service. If the "Print Spooler" service is stopped, the script or utility can send out an e-mail alert to my Outlook mailbox and restart the...

Archived from groups: microsoft.public.win2000.active_directory (More info?) Hello All, I have a domain with two DC's, both W2K, SP4, fully patched. Noticed odd things on network, checked replication and found that I'm getting Access Denied error message when trying to manually trigger a...

Archived from groups: microsoft.public.win2000.group_policy (More info?) I am getting SceCli and UserEnv errors all over my domain, on XP and Win2K computers. Below are the exact errors on my XP SP2 computer. Domain Controllers are Windows 2003. Any help would be greatly appreciated. Thanks...

How good is the Raspberry PI (Model B) for a cheap 480p gaming console.

Archived from groups: microsoft.public.windowsxp.general (More info?) Hi, I have a windows XP machine and I have DSL router connection for the Internet with Public IP. I am using some utilities to track the bandwidth/traffic usage. eventhough I am not using browsing, mails...etc., there is...

Archived from groups: microsoft.public.win2000.setup (More info?) I installed windows 2000 twice on my computer and I do not have the sound and video cards so that I could do a F Disk and completely reboot and re-install. How can I remove one of the windows 2000 installs under these...

I don't care what the price of a fan is. I need something to replace my hyper 212 evo cooler's fan. The fan makes a weird sound that is annoying. I need something that is really quiet and I heard cougar 120mm pwm would be a great option. However, does this fan produce any weird buzz noises or...