Question 12v Psu jumping around

[Cantholdanylonger]

i found this voltage tolerances on this forums
Specs for the +5V and +12V is 5%
For +5V = 4.75->5.25 V
For +12V = 11.4V ->12.6V

So, based on the data above, I can say my PSU is fine because it's still within the tolerance range. What I'm worried about is the rapid voltage fluctuation every 3-5 seconds.
psu is dropping from 12v to 11,9v when the system is under full load, its working fine though. no crash or freezing whatsover.
its a new psu and i used it for 5 month

Thx

spec
Motherboard Asrock B550M Pro4
Cpu ryzen 5 5600
Gpu Asrock rx 6600 Challenger
Psu 1stplayer dk premium PS-600AX 80+ Bronze 600W

 

[Lutfij]

Psu 1stplayer dk premium PS-600AX 80+ Bronze 600W
That's a low end unit.

psu is dropping from 12v to 11,9v when the system is under full load, its working fine though. no crash or freezing whatsover.
I'd keep an eye on the voltages if and only if you're seeing artifacting on your system when taxed or random shutdowns even when you're not having high temps on your CPU or GPU.

 

[--SID--]

That's a low end unit.

As low end as a Seasonic B12 BC because it's the same.

What I'm worried about is the rapid voltage fluctuation every 3-5 seconds.
psu is dropping from 12v to 11,9v when the system is under full load, its working fine though. no crash or freezing whatsover.

Software readings are not very trustfull. Better masure with a multimeter. But there's nothing to worry about here though.

 

[Cantholdanylonger]

Psu 1stplayer dk premium PS-600AX 80+ Bronze 600W
That's a low end unit.

psu is dropping from 12v to 11,9v when the system is under full load, its working fine though. no crash or freezing whatsover.
I'd keep an eye on the voltages if and only if you're seeing artifacting on your system when taxed or random shutdowns even when you're not having high temps on your CPU or GPU.

That's a low end unit.
what do you think about psu FSP VITA GM 850W ATX3.1 PCIe 5.1 80+ Gold - Full Modular?

I'd keep an eye on the voltages if and only if you're seeing artifacting on your system when taxed or random shutdowns even when you're not having high temps on your CPU or GPU.
i while ago its randomly shutdown, but right now is fine and it never happen again.

 

[Cantholdanylonger]

Software readings are not very trustfull. Better masure with a multimeter. But there's nothing to worry about here though.

Software readings are not very trustfull. Better masure with a multimeter. But there's nothing to worry about here though.

ok im gonna try it, but if the multimeter say the same as the software, and the voltage is up and down every sec should i replace it event though still within the tolerance range?