Hi!
Hardware on this setup: B450-F (Asus), 2700x, 32gb(2x16) Ripjaws Red RAM
I bought some ram a week ago rated at 3600 mhz 19 - 20 - 20 - 20 and thought hey why not get higher speed ram and clock down the latency a little to compensate for the high latency.
But I have been having SUCH headaches with this ram that I am pulling my hair already..
First problem being, the PC won't boot on any circumstance over 3200 mhz, put even 3266 and PC won't post, already that highly disturbs me. I can't use the damn thing at its normal speeds!
Secondly I thought hey, if I can't use this ram at 3600 - I'll just clock it to 3200 and lower the latency, but since I don't know the right latency numbers for this ram it crashes on heavy load.
It gives me no warning or error PC just shuts off under load. I tried 16 - 17 - 17- 17 and tried raising voltage raising latencies bit by bit but it always crashes under load.
The DOCP profile just sets the latency to 19 - 20 - 20 - 20 and doesn't make anything run well.
So the main problem is the ram speed, what's going on why can't I use the cursed thing at its rated speeds? I mean I am not even trying to overclock that much I just want to use what I paid for at its full potential.
I mean I don't want to use this ram at like 3000 mhz with MAJOR latency, when I paid for something fast, that's just not fair. I have the latest bios and have tried DRAM calculator setups (they don't boot).
Thanks to anyone who cares to read and has any ideas. Does anyone have a RAM map for this thing by any chance?
GlockOnDock
Hardware on this setup: B450-F (Asus), 2700x, 32gb(2x16) Ripjaws Red RAM
I bought some ram a week ago rated at 3600 mhz 19 - 20 - 20 - 20 and thought hey why not get higher speed ram and clock down the latency a little to compensate for the high latency.
But I have been having SUCH headaches with this ram that I am pulling my hair already..
First problem being, the PC won't boot on any circumstance over 3200 mhz, put even 3266 and PC won't post, already that highly disturbs me. I can't use the damn thing at its normal speeds!
Secondly I thought hey, if I can't use this ram at 3600 - I'll just clock it to 3200 and lower the latency, but since I don't know the right latency numbers for this ram it crashes on heavy load.
It gives me no warning or error PC just shuts off under load. I tried 16 - 17 - 17- 17 and tried raising voltage raising latencies bit by bit but it always crashes under load.
The DOCP profile just sets the latency to 19 - 20 - 20 - 20 and doesn't make anything run well.
So the main problem is the ram speed, what's going on why can't I use the cursed thing at its rated speeds? I mean I am not even trying to overclock that much I just want to use what I paid for at its full potential.
I mean I don't want to use this ram at like 3000 mhz with MAJOR latency, when I paid for something fast, that's just not fair. I have the latest bios and have tried DRAM calculator setups (they don't boot).
Thanks to anyone who cares to read and has any ideas. Does anyone have a RAM map for this thing by any chance?
GlockOnDock