3DMark06 Scores...Amazing...Part 2

[OvrClkr]

Please post your best 06score here. Trying to see what setups work the best.

Here is my best at 3.6Ghz :

3.85Ghz :

Ryan closed videl's thread so i decided to re-open 😉


Much appreciated

 

[cncmasterw]

Well i bumped up my CPU and got 13735 .... i would of figured 14k but that but oh well. Now for the gpu.

Quick update. Just reran the Bench got 14303 3.77 cpu 700gpu core 1100 Gpu memory

 

[cncmasterw]

Riva tuner is keeping me from getting my Score. Because I put back the clocks. Used CCC Overclocking tool and With 700core and 1100 memory i got 14355 Meaning Riva tuner is Too outdated to give me the score im looking for. So in order to do so I need to find Stable clocks and Just use the Bios editor and hope i dont ruin the graphics card.

 

[cncmasterw]

Installed Windows XP and Lost my windows 7 -_-"" I might have to Re format my pc.. -_-"""... Im currently on windows 7 BUT my product key went with the install...and I Dont have my product key. AS i had to call microsoft To obtain it.

 

[OvrClkr]

my product keys are in a safe =) .... 15 feet away 8P

 

[JDFan]

Installed Windows XP and Lost my windows 7 -_-"" I might have to Re format my pc.. -_-"""... Im currently on windows 7 BUT my product key went with the install...and I Dont have my product key. AS i had to call microsoft To obtain it.

Is the product key still on the system ? you could try using the MagicJellyBean to retrieve it ( Linkie ) - It will retrieve all of the product keys that are stored on the system so wouldn't hurt to give it a try !!

 

[cncmasterw]

Is the product key still on the system ? you could try using the MagicJellyBean to retrieve it ( Linkie ) - It will retrieve all of the product keys that are stored on the system so wouldn't hurt to give it a try !!

im magic and got it back >D. Hopefully Everything is well and all my installs work properly

 

[cncmasterw]

its dead in here.. I think i can see god O_O.... I thought he was a LIE!

 

[JDFan]

its dead in here.. I think i can see god O_O.... I thought he was a LIE!

Yep - 6 days with no new posts is a bit dead ! - just for you I'll post my newest 3dmark06 scores - Finally got the new TX3 Heatsink\Fan installed and things are running much cooler !! - The CPU idles at 34 -35C and only gets to 56C under Prime95 @3.2GHz (much better than the stock cooler that was idling at 46C and got to 69C under Prime95 @3.0 Ghz.) - Still haven't had time to do any real OC testing to see just how far this CPU can go but it's running 100% Stable at 3.2 GHz. on only 1.31V so should still have a good amount of room !! Also bumped the 5770 up a very small amount to see what kind of improvement it makes and a 25Mhz. core boost raised the Pixel fillrate by .4 GPixels and the Texture Fillrate by 1.0 GTexels and a 50 Mhz increase to the memory bumped the Bandwidth up from 76.4 GB\s to 80.0 GB\s - should be able to get quite a bit better score after finding the right combination of settings on the GPU and CPU with some testing !!

 

[cncmasterw]

congrats but those temps dont seem to right.

 

[JDFan]

congrats but those temps dont seem to right.

The Temps are the CPU overall Temp reported by the sensor - The individual internal Core temp sensors always reported about 8-10C lower than the overall CPU reading while it was a Triple core so the sensor is probably still reporting it higher than what the individual cores would be by about 8C so the actual Temps are most likely closer to 27C idle and 48C under prime95 but I go by the readings that are reported just to be safe (figure as long as I stay below 65 - 68C according to that sensor I'll not be getting anywhere close to having to worry about the CPU downclock that is set for 73C on the X3 720 CPU. )

 

[cncmasterw]

makes sense.

 

[nrnx]

No Overclocks, stock everything.

 

[cncmasterw]

those scores.. are a little obscure

 

[OvrClkr]

http://img32.imageshack.us/img32/693/3dmark06j.jpg

No Overclocks, stock everything.

my "click to zoom" is not working... do you have a link? score?

 

[EXT64]

Hmm, mine is. Here's the link I get when I click on it:

http://img32.imageshack.us/img32/693/3dmark06j.jpg

 

[nrnx]

<-- There you go

 

[EXT64]

Or Scores:

Total: 16797
2.0: 6246
3.0: 8795
CPU: 4188

 

[JDFan]

my "click to zoom" is not working... do you have a link? score?

Scores were :

16797 3dmarks
SM 2.0 6246
SM 3.0 8795
CPU 4188

On a X4 940 CPU @ 3.0Ghz. with a 5770 GPU and 4GB Ram

SO his SM2.0 and CPU scores were lower than my X3 720 @ 3.2Ghz. but somehow managed 1415 points higher on the SM 3.0 score with the same GPU I have 😗

 

[cncmasterw]

hmmm,,,,

 

[EXT64]

Thus showing the craziness of 3DMark.

 

[JDFan]

NRNX - What version Driver are you using on your 5770 ? (Guess maybe the new drivers have improved the SM3.0 scores perhaps - I hadn't updated yet due to hearing there were some problems with the latest release so was waiting for the next release.) - Or the 2.0 GBs of RAM I have is not enough for the test so the 4 GBs makes a difference.

 

[EXT64]

You dual card guys will really want 10.2 and 10.3. You might just want to wait for those at this point.

 

[JDFan]

You dual card guys will really want 10.2 and 10.3. You might just want to wait for those at this point.

Thats another possibility if he has Dual 5770s vs. my single card. ( though then it's strange he didn't do better on the SM2.0 tests as well)

 

[EXT64]

I thought he did, that would be pretty good for a single card.

 

[OvrClkr]

Scores were :

16797 3dmarks
SM 2.0 6246
SM 3.0 8795
CPU 4188

On a X4 940 CPU @ 3.0Ghz. with a 5770 GPU and 4GB Ram

SO his SM2.0 and CPU scores were lower than my X3 720 @ 3.2Ghz. but somehow managed 1415 points higher on the SM 3.0 score with the same GPU I have 😗

Im going to test at 3Ghz and compare scores... brb...