48bit LBA Hard Disk works with Aopen MB?

[Guest]

Archived from groups: alt.comp.periphs.mainboard.aopen (More info?)

Hi,
I have a Win98 system on a Aopen AK73(A) Motherboard. I have a new
160GB ATA100 hard disk. I updated BIOS firmware to version 1.20. I have
installed latest VIA 4in1 drivers v.4.37V(A). Now both BIOS and Win98
drivers should be ok for 48bit LBA disks but I still can't format the
entire capacity, I am stuck to those 137GB :-(

Did anyone have a good hint for letting Win98 use the entire size of
the HDisk?

Roberto

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.aopen (More info?)

You may have already looked at this...but if not...it might help

http://www.48bitlba.com/win98.htm

Robi wrote:
> Hi,
> I have a Win98 system on a Aopen AK73(A) Motherboard. I have a new
> 160GB ATA100 hard disk. I updated BIOS firmware to version 1.20. I have
> installed latest VIA 4in1 drivers v.4.37V(A). Now both BIOS and Win98
> drivers should be ok for 48bit LBA disks but I still can't format the
> entire capacity, I am stuck to those 137GB :-(
>
> Did anyone have a good hint for letting Win98 use the entire size of
> the HDisk?
>
> Roberto
>

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.aopen (More info?)

> You may have already looked at this...but if not...it might help
>
> http://www.48bitlba.com/win98.htm

I did. It does not :-(

There's something about a VIA 4in1 driver for IDE interfaces which
could support 48bit lba disks, but I really don't find that; I don't
know how to verify if a VIA 4in1 has such a support not. Docs are
really not helping that much.
I don't know how to verify if the 4in1 drivers installed for my
motherboard has such a support or not.

I fear the 4in1 drivers I downloaded do not support 48bit lba with
Win98.

Roberto