Hey everyone first of all english is not my native tongue so i'll do my best to be comprehensive.
I bought a brand new pc on november with that setup: CPU: i7 10700k/GPU: zotac trinity rtx 3080/RAM: 16gb 3000MHZ/ 1 to ssd nvme + 1 hdd/ motherboard: Z490 Aorus gygabyte elite AC
2 monitor was plugged to my GPU the main with Displayport and the secondary monitor with hdmi
i got it received on early december, and after less than a month i got a blackscreen while loading a League of Legends game, then i had to restart the PC to finally play the game, i started a new League of Legends game and got the blackscreen once again on both monitors, tried to get the signal back by switching off/on the monitor... without sucess, so i had to hard restart my pc; at this point i could have been able to play RDR2 for 100 hours in full ultra setting without any issues so i got kinda surprised.
Then after a third crash when i launched RDR2 (5 minutes or less in game) i got blackscreens on both of my monitor... and when my pc restarted, i had no signal on any of my monitor directly when my PC starte which was a new issue.
I tried many thing to get the signal back and i found one thing that "solved" that problem, is to plug my main monitor to my CPU graphic chipset (via hdmi), and my monitor was able to get a signal, and i could use my pc but ofc couldn't longer play any games (rdr2 for example since my rtx 3080 wasn"t enabled anymore...)
I contacted my PC compagny support to informs them about my problem, and i told them it was as i guessed, the GPU.
So after a month of waiting to get a new GPU, i got it delivered today, i've installed it in my case and at the first start with it, i got the same problem back (5 short beeps/red light that stay permanently + no signal on my monitor)
example of the 5 beeps sound (same as in this video it's not me btw):
View: https://youtu.be/AbvGBIf8ei4?t=370
screen of the red light that is permanently ON: https://image.noelshack.com/fichiers/2020/53/1/1609172402-16091723296254815429921658705126.jpg
normally the red light pops for a sec at the PC's starting and that's it with 1 beep
I think the red light is vga light.
So if anyone could help me with this issue? , im at on a situation where i don't know what i should do now, i did use my pc 100% working for not even a full month, and i waited 2 months between getting it and getting a new GPU which seems to not have been the issue.
I've tried to enable/disable CSM in Bios, and nothing new happened, still stuck with that blackscreen when im connecting monitor to GPU ports
I bought a brand new pc on november with that setup: CPU: i7 10700k/GPU: zotac trinity rtx 3080/RAM: 16gb 3000MHZ/ 1 to ssd nvme + 1 hdd/ motherboard: Z490 Aorus gygabyte elite AC
2 monitor was plugged to my GPU the main with Displayport and the secondary monitor with hdmi
i got it received on early december, and after less than a month i got a blackscreen while loading a League of Legends game, then i had to restart the PC to finally play the game, i started a new League of Legends game and got the blackscreen once again on both monitors, tried to get the signal back by switching off/on the monitor... without sucess, so i had to hard restart my pc; at this point i could have been able to play RDR2 for 100 hours in full ultra setting without any issues so i got kinda surprised.
Then after a third crash when i launched RDR2 (5 minutes or less in game) i got blackscreens on both of my monitor... and when my pc restarted, i had no signal on any of my monitor directly when my PC starte which was a new issue.
I tried many thing to get the signal back and i found one thing that "solved" that problem, is to plug my main monitor to my CPU graphic chipset (via hdmi), and my monitor was able to get a signal, and i could use my pc but ofc couldn't longer play any games (rdr2 for example since my rtx 3080 wasn"t enabled anymore...)
I contacted my PC compagny support to informs them about my problem, and i told them it was as i guessed, the GPU.
So after a month of waiting to get a new GPU, i got it delivered today, i've installed it in my case and at the first start with it, i got the same problem back (5 short beeps/red light that stay permanently + no signal on my monitor)
example of the 5 beeps sound (same as in this video it's not me btw):
screen of the red light that is permanently ON: https://image.noelshack.com/fichiers/2020/53/1/1609172402-16091723296254815429921658705126.jpg
normally the red light pops for a sec at the PC's starting and that's it with 1 beep
I think the red light is vga light.
So if anyone could help me with this issue? , im at on a situation where i don't know what i should do now, i did use my pc 100% working for not even a full month, and i waited 2 months between getting it and getting a new GPU which seems to not have been the issue.
I've tried to enable/disable CSM in Bios, and nothing new happened, still stuck with that blackscreen when im connecting monitor to GPU ports