Hi All,
Recently changed motherboard and CPU, and moved my Corsair H80i v2 across.
I am getting a "CPU Fan Speed Error" message on a cold boot, and have to go into the BIOS and exit it before it will start up. Problem doesn't happen on system restarts.
As per Corsair's instructions, the AIO is connected to the CPU Fan header, and my Asus b450 board has Q-fan disabled. I've also set it to DC with all temperature thresholds at 100%, with neither removing the error message.
I'm not getting anywhere particularly fast with Corsair support, and haven't found the solution while searching, so was hoping someone might have some insight or have the same style BIOS and know the correct settings to use?
CPU temps appear to be normal (40 Celsius at idle, 65 at load).
It's an Asus b450-f Rog Strix Gaming II
Recently changed motherboard and CPU, and moved my Corsair H80i v2 across.
I am getting a "CPU Fan Speed Error" message on a cold boot, and have to go into the BIOS and exit it before it will start up. Problem doesn't happen on system restarts.
As per Corsair's instructions, the AIO is connected to the CPU Fan header, and my Asus b450 board has Q-fan disabled. I've also set it to DC with all temperature thresholds at 100%, with neither removing the error message.
I'm not getting anywhere particularly fast with Corsair support, and haven't found the solution while searching, so was hoping someone might have some insight or have the same style BIOS and know the correct settings to use?
CPU temps appear to be normal (40 Celsius at idle, 65 at load).
It's an Asus b450-f Rog Strix Gaming II