Am I getting the right temperatures?

[romanrp]

hello, I just finished building my PC about an hour ago.
I have the i5-2500k.
My heatsink is the cooler master hyper 212+.
It has 2 Scythe Gentle Typhoon Fans on it in a push and pull config.
I also have a third Scythe Gentle typhoon fan on the top blowing cold air onto my ram and feeding the other fan with cold air.
I have the stock coolermaster fan that came with the heatsink on the side.
I also have a 120mm blue LED fan on the front, but that came with the case.
My case is the cooler master 430 elite.
I have been running prime 95 for 15-20 minutes, and My temperatures average around 47 degrees C, max 49.
Are these good temperatures?
Can I now go ahead with an OC or do I need to change something?
The cpu is at stock speeds, 3.3 ghz btw

 

[HEXiT]

temps seem fine, but depending on what kind of thermal paste you have used you may need to wait a bedding in period. if you used something like artic mx2 or mx3 compound you wont but arctic silver number 5 you will. that could mean having to wait 1-200 hours depending on the paste

 

[romanrp]

I have used the thermal paste that came with the heatsink.

 

[theLastOCguy]

What's your Turbo settings ? if it's around 3.7 Ghz and on Prime95 stress test then the temps seems reasonable. But if your room temperature is lower then 28C; in that case your temps does seem a bit too high for stock settings with a after-market cooler that has 2 fans !

 

[davcon]

Hot air rises and you're the first person i've ever read about using a top fan as an intake.
I would use the top fan as an exhaust like 99.9% of the world does.
Download Coretemp and take a reading.
Change the top fan to exhaust and take a reading.
Every manufacturer of cases that have top cut-outs use the fan as an exhaust for a reason.
Btw your temps are ok but you should try what i suggested.

 

[Bigmac80]

temps seem fine, but depending on what kind of thermal paste you have used you may need to wait a bedding in period. if you used something like artic mx2 or mx3 compound you wont but arctic silver number 5 you will. that could mean having to wait 1-200 hours depending on the paste

Does it really take that long to cure for the Arctic silver 5? i used the antec formula 5 and people say its the same as the artic silver 5. hopefully my temps will drop a little more...im getting 55c on prime 95 torture test for 5hours on my i5 2500k at 4.2ghz. But im only using 1 fan on my heatsink atm, will a 2nd fan in push pull reduce it by atleast 4-5c in temps? i have the prolimatech armageddon heatsink.

 

[romanrp]

@Davcon
I will try that in the morning, I just though it would be a good idea to cool my RAM and feed the the intake fan some cold air lol.
This is the diagram of my current setup
http://i1199.photobucket.com/albums/aa476/romanrp1/fans.png
Also, should I get a rear fan or will what I have got do?
I am also planning on getting the infamous gtx 480 (same price as 560ti where I am) , how would that affect my cooling?