- Mar 20, 2009
- 15,746
- 26
- 60,540
The idea is easy.
Exist two tables, 1st one is for OC stable with stability test and the 2nd one is only for OC (don't stable necessary)
1- The rules for OC stable are this:
Post the OC's here and in this format
Updated example:
Cpu: 955
Name: saint19
Stepping: C2
Frequency: 3700
ref*multi: 200*18.5
CPU voltage: 1.42
CPU-NB: 1.30
nb frequency: 2600
NB volts: 1.2
RAM: 4GB 1600Mhz DDR3 8-8-8-24-2T @ 1.65V
Motherboard: Gigabyte GA-890FXA-UD5
Cooling: Air cooling/Hyper 212+
OS: 7 64-bit
GFLOPS: 49 (Only for LinX)
(For Gigaflops, You must run either LinX for at least 5 runs, screen shot required, peak score will be taken)
The stability test can be do it with 2 hours on any of this progmras: Prime95, LinX, OCCT or y-cruncher in stress test mode*
* Launch the program, press 2, enter, 0, enter, x GB (x being nearly how much RAM your system has free according to task manager), and press enter. The program will periodically indicate how much time has been consumed for the testing.
It doesn't need to be in that specific order, but don't post just a screenie, it makes it much slower for me to update, and i don't have enough info to fill in many of the spaces. Thanks in advance
Posts with no verification of stability (screenie) were not added to the list, furthermore, posts a CPUz validation only were added to the 2nd table. If you wish to be added to the list. Follow the above format and post a screenshot verifying stability.
Give as much info as you can. Results can also be updated or filled in. Please make a new post to do so and post the pic in thumbnail size.
Stable OC
Stable OC table
Insane OC
Insane OC table
Now start to OC folks!
I hate that this don't support HTML code
Exist two tables, 1st one is for OC stable with stability test and the 2nd one is only for OC (don't stable necessary)
1- The rules for OC stable are this:
Post the OC's here and in this format
Updated example:
Cpu: 955
Name: saint19
Stepping: C2
Frequency: 3700
ref*multi: 200*18.5
CPU voltage: 1.42
CPU-NB: 1.30
nb frequency: 2600
NB volts: 1.2
RAM: 4GB 1600Mhz DDR3 8-8-8-24-2T @ 1.65V
Motherboard: Gigabyte GA-890FXA-UD5
Cooling: Air cooling/Hyper 212+
OS: 7 64-bit
GFLOPS: 49 (Only for LinX)
(For Gigaflops, You must run either LinX for at least 5 runs, screen shot required, peak score will be taken)
The stability test can be do it with 2 hours on any of this progmras: Prime95, LinX, OCCT or y-cruncher in stress test mode*
* Launch the program, press 2, enter, 0, enter, x GB (x being nearly how much RAM your system has free according to task manager), and press enter. The program will periodically indicate how much time has been consumed for the testing.
It doesn't need to be in that specific order, but don't post just a screenie, it makes it much slower for me to update, and i don't have enough info to fill in many of the spaces. Thanks in advance
Posts with no verification of stability (screenie) were not added to the list, furthermore, posts a CPUz validation only were added to the 2nd table. If you wish to be added to the list. Follow the above format and post a screenshot verifying stability.
Give as much info as you can. Results can also be updated or filled in. Please make a new post to do so and post the pic in thumbnail size.
Stable OC
Stable OC table
Insane OC
Insane OC table
Now start to OC folks!
I hate that this don't support HTML code
Facebook
Twitter
Instagram