I'm upgrading my motherboard from an MSI GF615M-P31 to the Fatal1ty board listed in the title.
I have a unique problem that i haven't found on any forums so i'm asking the pros!
I have every single cable and plug firmly plugged in and i've double checked all connections so lets get that out of the way.
When i start the computer, the Dr. Debug LEDs start it usually cycles to various points before shutting off. No warning, no blue screen, just shuts off.
This is a progressive error as sometimes it gets farther, and other times it stops shorter, it's really just throwing me for a loop.
Basically the problem is that it keeps shutting down without warning after about 20 seconds or so.
I've never done a motherboard transfer / upgrade so i'm much more inclined to believe it's something i'm missing rather than a faulty mobo.
I'm going to post videos showing the Dr. Debug LED process as well as what's being displayed on screen but regardless of whether i try to adjust the BIOS or let it try to boot, it shuts down in the middle of it.
If I had to develop a little independance and use my brain i would guess that it may be a PSU failure, but that would be incredibly strange as it had been running on my old board without EVER failing at all.
Specs: CPU Phenom II x6 1100t stock clock 3.3ghz /w Zalman heatsinc (fan)
GPU GTX 560 Ti 2gb also stock
Corsair 620 watt PSU
2x4 gb Patriot DDR3 RAM @ 1333
Seagate Barracuda 1TB SATA HDD
I have a unique problem that i haven't found on any forums so i'm asking the pros!
I have every single cable and plug firmly plugged in and i've double checked all connections so lets get that out of the way.
When i start the computer, the Dr. Debug LEDs start it usually cycles to various points before shutting off. No warning, no blue screen, just shuts off.
This is a progressive error as sometimes it gets farther, and other times it stops shorter, it's really just throwing me for a loop.
Basically the problem is that it keeps shutting down without warning after about 20 seconds or so.
I've never done a motherboard transfer / upgrade so i'm much more inclined to believe it's something i'm missing rather than a faulty mobo.
I'm going to post videos showing the Dr. Debug LED process as well as what's being displayed on screen but regardless of whether i try to adjust the BIOS or let it try to boot, it shuts down in the middle of it.
If I had to develop a little independance and use my brain i would guess that it may be a PSU failure, but that would be incredibly strange as it had been running on my old board without EVER failing at all.
Specs: CPU Phenom II x6 1100t stock clock 3.3ghz /w Zalman heatsinc (fan)
GPU GTX 560 Ti 2gb also stock
Corsair 620 watt PSU
2x4 gb Patriot DDR3 RAM @ 1333
Seagate Barracuda 1TB SATA HDD