Bad static in radio recption when computer is on

Titanion

Distinguished
Dec 8, 2002
1,510
6
19,795
What can cause bad static in radio recption when a computer is on... it is on a computer I build for a friend... NF7-S with a mobile Barton 2500+ clocked at 210x11.5...

<font color=red><b>NF7-S/Mobile Barton 2600+
211x11.5 1.824v SLK900A
1GB Corsair XMS PC3200
Sapphire 9500np@9700np</font color=red><font color=black>
NF7-S/Barton 2500+
200x11.5 1.76v
512MB XMS PC2700
XFX Ti4200
 

Donkey

Distinguished
Jan 7, 2004
5
0
18,510
Power supply. Had the same problem with a friends computer; couldn't use his short-wave when his computer was on. On a hunch we changed the power supply (which was a cheap unit) to an Antec 330w True Power, and the problem went away. Could be the shielding inside the PS...guessing here, but it's worth a try if you have access to another PS.
 

Titanion

Distinguished
Dec 8, 2002
1,510
6
19,795
Any more discussion on this topic... is it a done deal... the generic psu for sure...

<font color=red><b>NF7-S/Mobile Barton 2600+
211x11.5 1.824v SLK900A
1GB Corsair XMS PC3200
Sapphire 9500np@9700np</font color=red><font color=black>
NF7-S/Barton 2500+
200x11.5 1.76v
512MB XMS PC2700
XFX Ti4200
 

PukePile

Distinguished
Jan 23, 2004
546
0
18,980
Might be his speakers.I had that problem with some cheap speakers i bought once.

40k in aquamark 3
<A HREF="http://arc.aquamark3.com/arc/arc_view.php?run=77119011
" target="_new">http://arc.aquamark3.com/arc/arc_view.php?run=77119011
</A>
P4b2.4@2.8||1024mb DDR@392mhz||9800pro@414/732||Viewsonic UltraBrite 19"||Panisonic DVD-RW
 

Schmide

Distinguished
Aug 2, 2001
1,442
0
19,280
If you have the computer audio outputs hooked up to the stereo and the computer and stereo are hooked up to different power outlets, you could get what is called a floating or noisy ground. A possible solution is plugging them into the same outlet, and if that doesn’t work you may try a better power strip.

Dichromatic for your viewing plesure...
 

Crashman

Polypheme
Former Staff
It's normally caused by using an illegal case or power supply. I say illegal because the parts aren't FCC certified, and it's illegal to interfere with reception (or transmittion). These parts are perfectly legal when located in any location where they cannot interfere with radio reception or communications equipment.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>
 

cerwinvega

Distinguished
Jun 21, 2004
2
0
18,510
Crashman,

Yeah, that's cool, and you're probably right. I just wanted to piont out, that the FSB Spread Spectrum's sole purpose is to prevent what would otherwise be some obnoxious radio interference from the computer.

Some people disable it, not knowing what it is, then wonder wtf. Thought that this might have been the case.

<P ID="edit"><FONT SIZE=-1><EM>Edited by cerwinvega on 06/21/04 08:06 AM.</EM></FONT></P>
 

SlowJogger

Honorable
Mar 23, 2013
1
0
10,510
I had that problem, and quickly discovered it wasn't the computer. I fixed it by plugging the surge protector into a different outlet.

Update: I replaced the outlet (with a GFCI), and that fixed the problem.
 

bryanl

Distinguished
Aug 31, 2009
236
1
18,715


Does it lack one of these?

WjnySgz.jpg


That filter both keeps noise generated by the power supply and computer from getting out of the AC lines and AC line noise from getting into the computer.