Archived from groups: comp.periphs.printers (
More info?)
On Sat, 12 Jun 2004 15:57:00 GMT, "josh" <josqb@cinci.rr.com> wrote:
>Anyone know the difference between the c-m-y color versions of the Canon
>BCI-3e and BCI-6 cartridges?
>
There are subtle differences but none the less they are a bit
different. The 3 color printers do not have the photo magenta and
cyan, where the 6 color printers do....
So... to acheive the proper color from the 4 color printers, the
shades or range of ink gamut is a bit diffrent than a printers range
that includes the photo cyan and magenta.
So the way they mix will vary slightly as the 4 color printer will
rely on diffrent information and amounts of ink where a 6 color
printer may not have to mix the same shade.
I was told that if you take bci 6 ink and replace it with bci 3e there
will be noticable difference in output but you can a bci 6 and use it
for bci 3e without much difference.
bottom line is, the inks are formulated differently because the mixes
will be different concentrations.
It would not be recommended. It would not hurt anything but if a
slight variance doesnt bother you then it wouldnt hurt a thing.
about the black.... I belive peoples biggest gripe about the 960 black
text is the speed. Under high resolution scans and 10x lupe, there is
no noticable differences in text quality. As a matter of fact, the
950/960 would have the ability of producing full 4800x1200 text output
where the 850/860 is limited to 600.. so thats something to think
about.
Its just the speed that is the main factor but you can print in draft
mode with excellent quality on the 960 and its very fast.
Facebook
Twitter
Instagram