Question Biostar TB360 BTC pro 2.0 - No display + SwitchON by itself

[MonkeyMine]

New Biostar tb360 BTC pro 2.0, plus the following

• i5 8400 + stock heatsink + fan
• Corsair Hx1000
• Kingston Valueram DDR4 2666
• HDMI to DVI cable
• VGA cable

Steps

1. Install all above
2. Plugged the 24 pin + 8pin CPU + CPU fan
3. BIOS reset (via Jumper)
4. PSU connected to power
5. Turn the hard switch on at the back of PSU - tried a different PSU no difference

Problem

• Mobo switched on automatically even when power jumper is not connected (CPU fan is on, PSU fan is on)
• No display, not even BIOS screen tried
  • from Mobo, monitor from digital input and analogue input
  • from GPU on PCIe (Radeon rx580 powered from PSU), monitor from digital input and analogue input

Things Tried So far

• Checked the usual, e.g. RAM plugged in properly

Help please!!!

 

[miner365]

Anyone?

New Biostar tb360 BTC pro 2.0, plus the following

• i5 8400 + stock heatsink + fan
• Corsair Hx1000
• Kingston Valueram DDR4 2666
• HDMI to DVI cable
• VGA cable

Steps

1. Install all above
2. Plugged the 24 pin + 8pin CPU + CPU fan
3. BIOS reset (via Jumper)
4. PSU connected to power
5. Turn the hard switch on at the back of PSU - tried a different PSU no difference

Problem

• Mobo switched on automatically even when power jumper is not connected (CPU fan is on, PSU fan is on)
• No display, not even BIOS screen tried
  • from Mobo, monitor from digital input and analogue input
  • from GPU on PCIe (Radeon rx580 powered from PSU), monitor from digital input and analogue input

Things Tried So far

• Checked the usual, e.g. RAM plugged in properly

Help please!!!

same problem with the same motherboard

 

[miner365]

i have maybe a solution for you

first i think is because you don't have a graphic card , because normaly , the processor dos not have graphic interface and it can't show anything on the screen , so i think you need a graphic card .Am going to buy a graphic card on alibaba

 

[ronniemgonzaga]

Hi,

HELP Please

I got same issue. I have GPU and even try using the VGA but still not showing a display. I even reset the BIOS but still not helping. Seems like both display and Input/Keyboard are both not working


Thank you

 

[ibo_bibo]

I have the exact same problem, with very similar hardware:

Biostar TB360 BTC pro 2.0
i5 8400 + stock heatsink + fan
SK Hynix DDR4 2666

I tried HDMI to DVI cable
I tried VGA cable
I tried 1660 Super
Nothing...

OP - were able to get it working?
A guy on reddit had same RAM and another CPU, he says 2666 RAM wouldn't work (eventho biostar page says it should):

View: https://www.reddit.com/r/gpumining/comments/mt49lb/rig_wont_postboot_cpu_fan_turns_on_for_1_second/

 

[ibo_bibo]

My issue was defective CPU. Once I changed it, it worked. G5420T