Hi, newly built PC, this is my spec:
- ASUS H81M-A mATX
- SSD 120GB OCZ Arc 100
- Crucial 8GB (2x4GB) CL9 1600Mhz Ballistix
- Intel Core i5 4690K 3,5 GHz, 6MB
- MSI Radeon R9 280 3GB GAMING
- Fractal Design Integra M 550W 80+ Bronze
I built this on thursday and everything worked fine, the next day I left the PC on for about 2 hours and when I came back I couldn't get a signal on the screen, at all!
After that I tried numerous fixes:
- Re-installing drivers.
- Re-installing windows.
- Switching from "Hybrid BIOS" to "Legacy BIOS" on my R9 280 GFX.
- Switching out power cords from the PSU.
- changing BIOS GFX setting to "PCIE" instead of "AUTO" or "iGPU".
- Resetting CMOS / Jumpers.
Then I tried putting the R9 280 GFX card into my other PC rig, had the same response, wouldn't show anything on screen. I looked it up on google and saw that alot of people have had problems with this card, so I guess it failed on me. (Though not sure)
After all this mess, I figured I'll just use another card. I plug in my old Nvidia GeForce GTX 560Ti, boots up just fine.
But as soon as I install the Nvidia Driver and reboot, the "No signal to monitor" starts. I can hear that windows is running on my headphones but it just wont connect to the monitor.
The onboard GFX works fine, also removing the nvidia drivers WILL let me past the logo / startup screen.
This is what I've tried so far:
- Reinstalling new and old nvidia drivers, removing them using guru3d driver removal tool.
- Disabling the onboard graphic card using device manager.
- Updated BIOS to latest version.
- Changing BIOS GFX setting to "PCIE" instead of "AUTO" or "iGPU".
- Reinstalling W7 with a clean slate.
- TdRdelay to "10".
- Juan Merlos "Fix" on the forums.
If someone have any solution to this problem, It would be greatly appreciated!
- ASUS H81M-A mATX
- SSD 120GB OCZ Arc 100
- Crucial 8GB (2x4GB) CL9 1600Mhz Ballistix
- Intel Core i5 4690K 3,5 GHz, 6MB
- MSI Radeon R9 280 3GB GAMING
- Fractal Design Integra M 550W 80+ Bronze
I built this on thursday and everything worked fine, the next day I left the PC on for about 2 hours and when I came back I couldn't get a signal on the screen, at all!
After that I tried numerous fixes:
- Re-installing drivers.
- Re-installing windows.
- Switching from "Hybrid BIOS" to "Legacy BIOS" on my R9 280 GFX.
- Switching out power cords from the PSU.
- changing BIOS GFX setting to "PCIE" instead of "AUTO" or "iGPU".
- Resetting CMOS / Jumpers.
Then I tried putting the R9 280 GFX card into my other PC rig, had the same response, wouldn't show anything on screen. I looked it up on google and saw that alot of people have had problems with this card, so I guess it failed on me. (Though not sure)
After all this mess, I figured I'll just use another card. I plug in my old Nvidia GeForce GTX 560Ti, boots up just fine.
But as soon as I install the Nvidia Driver and reboot, the "No signal to monitor" starts. I can hear that windows is running on my headphones but it just wont connect to the monitor.
The onboard GFX works fine, also removing the nvidia drivers WILL let me past the logo / startup screen.
This is what I've tried so far:
- Reinstalling new and old nvidia drivers, removing them using guru3d driver removal tool.
- Disabling the onboard graphic card using device manager.
- Updated BIOS to latest version.
- Changing BIOS GFX setting to "PCIE" instead of "AUTO" or "iGPU".
- Reinstalling W7 with a clean slate.
- TdRdelay to "10".
- Juan Merlos "Fix" on the forums.
If someone have any solution to this problem, It would be greatly appreciated!