Question Black screen with artifact while trying to install gpu driver

[Thsm]

I bought a new card Gigabyte rtx 2060 super and it works very smoothly until today i turned on the pc and right before it goes in to login screen on windows it freezes on the aorus logo showing some green lines and then after 2 to 3 secs it loads the login screen but in the most lowest resolution and when I checked the driver on device manager it shows code 43. I don't know if the gpu itself had a problem tried already different method like updating driver, updating mboard bios un installing nvidia driver using DDU in safe mode then installing it again. Nothing works and it also happen while installing an invidia driver it goes blacks reen with some green lines on it freezes in there like 2 to 3 sec and the installation finishes but still have the code 43 on. I don't know if it's psu? Is the gpu not having enough power? This is my spec

Ryzen 5 2600
Gigabyte B450 pro
Evga 650
16gb 32mhz ram
And the Gigabyte aorus rtx 2060 super

Its too much of a hassle to bring the gpu back to the store because its a 3hour drive. So I wanted to make sure if it is really the problem.

I would appreciate any help. Thank yoy

 

[g-unit1111]

What's the exact model of your PSU? And have you tried your graphics card in another system? I would start there first.

 

[armandoj4534]

I'm having the exact same problem with my 2070. I have an EVGA 850 GQ power supply. I've tried uninstalling the drivers, reverting to an older version of windows, reseating the graphics card, and have done a fresh install of windows. Nothing seems to work
Ryzen 5 2600
MSI B450 Tomohawk
16gbs 3200 Gskill Ripjaws
Gigabyte rtx 2070 windforce

 

[Thsm]

I'm having the exact same problem with my 2070. I have an EVGA 850 GQ power supply. I've tried uninstalling the drivers, reverting to an older version of windows, reseating the graphics card, and have done a fresh install of windows. Nothing seems to work
Ryzen 5 2600
MSI B450 Tomohawk
16gbs 3200 Gskill Ripjaws
Gigabyte rtx 2070 windforce

Yeah nothing works I also tried everything going to have my friend try my gpu next week to know if the card is faulty.