Hey guys I wanted to post this for anyone as noob to builds and setups as I am. I just finished building my new rig not to long ago which consists of Asus P6T Deluxe V2 and 6 Gigs of Corsair ddr3 1600 memory. I set all my memory in the proper slots A-1 B-1 C-1 and after about two days of no problems I started to experience heavy BSOD in games applications or even just boot up. The error was Memory Management Physical Dump etc.
I spent a bit of time researching and did not realize the auto settings on this motherboard. According to ASUS the ram is compatible via their qualified list so I just assumed default settings would be fine. I had to manually set all my memory timings as per what Corsair recommends for my memory on their forums.
Been running 5 days now without any problems and passing all prime 95 tests with no errors when testing for at least 4-5 hours
I was very close to RMA or returning my memory to Newegg but was not convinced when every single stick passed memtest on their own and in different slots. I hope this helps someone in the same boat and if not, I apologize for the wasted thread
I spent a bit of time researching and did not realize the auto settings on this motherboard. According to ASUS the ram is compatible via their qualified list so I just assumed default settings would be fine. I had to manually set all my memory timings as per what Corsair recommends for my memory on their forums.
Been running 5 days now without any problems and passing all prime 95 tests with no errors when testing for at least 4-5 hours
I was very close to RMA or returning my memory to Newegg but was not convinced when every single stick passed memtest on their own and in different slots. I hope this helps someone in the same boat and if not, I apologize for the wasted thread