Hey everyone, I was hoping someone could help me figure out why I keep crashing.
My rig:
Motherboard: GA-Z77X-UD3H
CPU: Intel i5-3570 @3.4, OCed to 4.5
Heatsink: CM Hyper 212+
GPU: EVGA GTX670 FTW 2048MG GDDR5 256bit
Ram: Patriot extreme masters 2x 4GB
PSU: Corsair TX 750 W
Storage: ADATA Sx900 256 GB SSD
Secondary storage: Seagate Barracuda 1TB
OS: Windows 7 64-bit.
Decided to boot from my OCed profile today and make sure everything was running fine, ran Prime95 but I keep getting BSOD. The first one was this (sorry for the flash) - http://imgur.com/QQCZF After doing some research, I updated my graphics driver and ran Prime95 again. I got to about test 12 then I received this one - http://imgur.com/KcVrg At this point I ran verifier.exe and rebooted, and received this one. http://imgur.com/VW7tv
I seem to be getting these a lot lately. Event viewer has seven instances of kernal-power id 41 (63) crashes for this week. It will sometimes crash when not OCed and on default settings, so I'm not sure what's causing it. It's a brand new computer I built about a month ago.
Here are my temps for Prime95- http://i.imgur.com/SS1jY.jpg The highest the max has gotten is 79, 86, 82, 82, respectively.
Here are the minidump files from today's crashes. http://www.mediafire.com/?8ilaxe9bm2rjn72#!
Any help is greatly appreciated!
My rig:
Motherboard: GA-Z77X-UD3H
CPU: Intel i5-3570 @3.4, OCed to 4.5
Heatsink: CM Hyper 212+
GPU: EVGA GTX670 FTW 2048MG GDDR5 256bit
Ram: Patriot extreme masters 2x 4GB
PSU: Corsair TX 750 W
Storage: ADATA Sx900 256 GB SSD
Secondary storage: Seagate Barracuda 1TB
OS: Windows 7 64-bit.
Decided to boot from my OCed profile today and make sure everything was running fine, ran Prime95 but I keep getting BSOD. The first one was this (sorry for the flash) - http://imgur.com/QQCZF After doing some research, I updated my graphics driver and ran Prime95 again. I got to about test 12 then I received this one - http://imgur.com/KcVrg At this point I ran verifier.exe and rebooted, and received this one. http://imgur.com/VW7tv
I seem to be getting these a lot lately. Event viewer has seven instances of kernal-power id 41 (63) crashes for this week. It will sometimes crash when not OCed and on default settings, so I'm not sure what's causing it. It's a brand new computer I built about a month ago.
Here are my temps for Prime95- http://i.imgur.com/SS1jY.jpg The highest the max has gotten is 79, 86, 82, 82, respectively.
Here are the minidump files from today's crashes. http://www.mediafire.com/?8ilaxe9bm2rjn72#!
Any help is greatly appreciated!