Question BSODs after stopping the test in AIDA64 ?

[ScreperisLT]

So I have recently built a PC out of used parts. I started stress testing the CPU and RAM ( CPU+FPU+Cache+RAM ). The test was going fine ( I stress tested it for about 10 minutes ), until I clicked Stop and then the PC immediately froze and threw a BSOD ( PAGE FAULT IN NONPAGED AREA ). I did not overclock any of my parts and I cannot reproduce the error again. I want to be cautious, because I am going to sell this PC.
Does anyone have any idea what could be causing this?

Minidump : https://drive.google.com/file/d/1D4jkx3IRQEll79Z-DRg-RQaTSJqKQV0n/view?usp=drive_link

Specs :
ASUS B85M-G
Intel Core i5-4670
4 x 4GB DDR3 1600Mhz RAM
Gigabyte RX 580 4GB
Chieftec 500W PSU

 

[CountMike]

So I have recently built a PC out of used parts. I started stress testing the CPU and RAM ( CPU+FPU+Cache+RAM ). The test was going fine ( I stress tested it for about 10 minutes ), until I clicked Stop and then the PC immediately froze and threw a BSOD ( PAGE FAULT IN NONPAGED AREA ). I did not overclock any of my parts and I cannot reproduce the error again. I want to be cautious, because I am going to sell this PC.
Does anyone have any idea what could be causing this?

Minidump : https://drive.google.com/file/d/1D4jkx3IRQEll79Z-DRg-RQaTSJqKQV0n/view?usp=drive_link

Specs :
ASUS B85M-G
Intel Core i5-4670
4 x 4GB DDR3 1600Mhz RAM
Gigabyte RX 580 4GB
Chieftec 500W PSU

Run some other tests. this may be only because of Aida's fault. OCCT is good one.