I am building an editing PC that will be required to run 4k footage and periodically work with After Effects.
I received an I7 6850x as payment for a gig recently and now I intend to build a rig around it.
The following are the components I have planned to build out the PC.
ASRock LGA2011-v3/ Intel X99/ DDR4/SATA3&USB3.1/ Wi-Fi/ATX Motherboard (X99 TAICHI) https://www.amazon.com/dp/B01ITOLDQI/ref=cm_sw_r_cp_apa_F2EeAbFQWN74T
G.SKILL F4-3000C15D-32GTZ TridentZ Series 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3000 (PC4 24000) Intel Z170 https://www.amazon.com/dp/B0171GQHZC/ref=cm_sw_r_cp_apa_E3EeAb9Y13Q7N
Noctua NH-D14 6 Heatpipe Dual Radiator with 140mm/120mm Dual SSO Bearing Fans CPU Cooler https://www.amazon.com/dp/B002VKVZ1A/ref=cm_sw_r_cp_apa_k4EeAb5B7RK3X
Plextor M8Pe 512GB M.2 PCIe NVMe Solid-State Drive with Heatsink (PX-512M8PeG) https://www.amazon.com/dp/B01JCXXRVE/ref=cm_sw_r_cp_apa_U4EeAbRV2WDE4
SanDisk 1TB Ultra 3D NAND SATA III SSD - 2.5-inch Solid State Drive - SDSSDH3-1T00-G25 https://www.amazon.com/dp/B071KGRXRG/ref=cm_sw_r_cp_apa_m5EeAbT8YCAN6
The rest I will pull from my existing rig.
Will this work well?
I received an I7 6850x as payment for a gig recently and now I intend to build a rig around it.
The following are the components I have planned to build out the PC.
ASRock LGA2011-v3/ Intel X99/ DDR4/SATA3&USB3.1/ Wi-Fi/ATX Motherboard (X99 TAICHI) https://www.amazon.com/dp/B01ITOLDQI/ref=cm_sw_r_cp_apa_F2EeAbFQWN74T
G.SKILL F4-3000C15D-32GTZ TridentZ Series 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3000 (PC4 24000) Intel Z170 https://www.amazon.com/dp/B0171GQHZC/ref=cm_sw_r_cp_apa_E3EeAb9Y13Q7N
Noctua NH-D14 6 Heatpipe Dual Radiator with 140mm/120mm Dual SSO Bearing Fans CPU Cooler https://www.amazon.com/dp/B002VKVZ1A/ref=cm_sw_r_cp_apa_k4EeAb5B7RK3X
Plextor M8Pe 512GB M.2 PCIe NVMe Solid-State Drive with Heatsink (PX-512M8PeG) https://www.amazon.com/dp/B01JCXXRVE/ref=cm_sw_r_cp_apa_U4EeAbRV2WDE4
SanDisk 1TB Ultra 3D NAND SATA III SSD - 2.5-inch Solid State Drive - SDSSDH3-1T00-G25 https://www.amazon.com/dp/B071KGRXRG/ref=cm_sw_r_cp_apa_m5EeAbT8YCAN6
The rest I will pull from my existing rig.
Will this work well?