Built new PC. Monitor recognizes that something is plugged in but screen wont turn on

[atharosgaming]

So I just built a computer and it turns on and all physical signs that it is worming are on but whenever I plug it into any monitor via HDMI or VGA the screen doesnt show up. I tried pulling the graphics card, switching the RAM slots, and restarting it multiple times. Nothing is working.

My parts are:
Case: Carbide series 100R
MOBO: Asus Prime A320M-K
GPU: Geforce GTX 1060
PSU: EVGA 500W 80 plus
Processor: AMD Ryzen 3 1200
RAM: 8GB DDR4-2400 UDIMM 1.2V CL17

I have been searching forums for hours trying to figure out how to solve this problem.

 

[earth_crisis101]

So I just built a computer and it turns on and all physical signs that it is worming are on but whenever I plug it into any monitor via HDMI or VGA the screen doesnt show up. I tried pulling the graphics card, switching the RAM slots, and restarting it multiple times. Nothing is working.

My parts are:
Case: Carbide series 100R
MOBO: Asus Prime A320M-K
GPU: Geforce GTX 1060
PSU: EVGA 500W 80 plus
Processor: AMD Ryzen 3 1200
RAM: 8GB DDR4-2400 UDIMM 1.2V CL17

I have been searching forums for hours trying to figure out how to solve this problem.

Hi,

Is the PSU brand new ? I had this problem once, and the problem was the PSU being too old and not responding correctly with some GPUs. I could hear the coil whine etc. I bought a new PSU and then everything worked fine. Do you have another GPU or PSU to do a test ?

 

[atharosgaming]

I fixed it. Turns out I was missing a power cord for the motherboard