Question Can I overclock my Ryzen 2400g more?

[Elmir221]

I'm trying to overclock my cpu (never done it before), but when I do my research I'm confused.
1.45v is already too high for this particular cpu, but i didn't even tweak anything. Just auto on the BIOS
it doesn't get too hot either.
So can I push it a little more or try to downclock it or just leave it as is?
I also want to try to overclock the gpu and memory if it's possible

here is the link for the image of cpu z
https://drive.google.com/file/d/1cNodP7DmjTr-oncavFAV9g-LoHFXk3Sn/view?usp=sharing

 

[Barty1884]

The auto-voltage for a given chip depends on the board. Some boards will apply a little too much voltage, but all within safe parameters.

You certainly should be able to OC it manually, you might even find you can do a stable 4.0GHz at a lower than "auto" voltage - wouldn't be unheard of.

 

[Elmir221]

Ok now there's something happening. After I try to overclock it with ryzen master to 4ghz with 1.375v and overclock the apu to 600mhz it won't even boot. 🙁

 

[Elmir221]

Ok now there's something happening. After I try to overclock it with ryzen master to 4ghz with 1.375v and overclock the apu to 600mhz it won't even boot. 🙁

And the debug led light up on cpu. My motherboard is msi b350m bazooka

 

[Elmir221]

The auto-voltage for a given chip depends on the board. Some boards will apply a little too much voltage, but all within safe parameters.

You certainly should be able to OC it manually, you might even find you can do a stable 4.0GHz at a lower than "auto" voltage - wouldn't be unheard of.

Please help 🙁

 

[Elmir221]

After I clear the cmos, it does boot. And my overclocking attempt work? Is it normal?

 

[Barty1884]

You cleared the CMOS, that'll reset the OC. Not sure what the question is?

 

[Elmir221]

You cleared the CMOS, that'll reset the OC. Not sure what the question is?

The overclock that i mention at 4ghz work. Is that normal after i cleared the cmos?

 

[Barty1884]

No, it is not normal. You reset the BIOS by clearing the CMOS, all OCing changes should revert.

Where are you OCing? BIOS? Software?

 

[Elmir221]

No, it is not normal. You reset the BIOS by clearing the CMOS, all OCing changes should revert.

Where are you OCing? BIOS? Software?

I'm using ryzen master, but I revert it back to normal once i saw it cause I scared I might mess up something