Pc specs
Case- colermaster master box Mb311L
Motherboard - msi b550m pro-vdh wifi
Cpu - ryzen 5 3600 stock wraith cooler
GPU - Asus ko 3060ti 8gb 0c edition
Psu- seasonic focus 850 gold
MY case has the stock fans it came with ( 2 Inlet), I did buy a box of 3 coolermaster mf120r a-rgb fans and added a rear (exhaust) these fans can't be daisy chained I don't think, also the connection to my motherboards headers are extremely loose, when I blow out my pc with the duster I always have to reattach the wire, I don't know if that's a design flaw in the fan or if they are not the correct connections for my motherboard, I have 2 new extra fans but don't have them installed as I don't have any more fan headers and I have no idea if they make something to turn say 2 connections into 1 so 2 fans per header or even if I can do that without burning up something idk, I have seen fans that can be daisy chained together but again I don't know if those go to the motherboard or a psu connection or how they hook up, I know I want to add more fans my room gets pretty warm even with ac and 3 fans isn't enough so what can I do/how do I add more fans up top without more areas to connect them?
if I have to switch fan brands/models for daisy chaining I will I just need to make sure they are compatible with my rig/mobo/psu
When I do add more fans should I go 3 up top so I'll have 5 inlet and one exhaust or should I flip the rear around top make a third inlet and exhaust it the top 3? Like what config would I go for
As far as cpu cooler goes I'm not looking to spend a huge amount as I'm upgrading to a 5900x, a new motherboard and case after I get my surgery if funds permit and this pc will be used to stream (capture from main pc) like a dual pc setup I did see the noctua downdraft (low profile) cooler which I was told as my mobo is pretty cheap and doesn't have vrm heatsinks it would cool the vrms as well but I dont know if that cooler will clear my ram I have 4 8gb sticks of trident neo so I'm looking for recommendations on a decent but not break the bank cooler, that money will be going for the nh14 in the new build when I can get it.
So I'm just trying to figure out how to add more fans to the top of my case as it has a spot for them with a mesh screen magnetic cover, that has to be compatible with my motherboard /psu, what config I should run (5 inlet 1 exhaust or 3 and 3)
looking for a cpu cooler that will keep my cpu cool (not watercooled) that's not going to break the bank ill get MX blue thermal paste for the computer store to use they use cheap paste which I don't want.
Case- colermaster master box Mb311L
Motherboard - msi b550m pro-vdh wifi
Cpu - ryzen 5 3600 stock wraith cooler
GPU - Asus ko 3060ti 8gb 0c edition
Psu- seasonic focus 850 gold
MY case has the stock fans it came with ( 2 Inlet), I did buy a box of 3 coolermaster mf120r a-rgb fans and added a rear (exhaust) these fans can't be daisy chained I don't think, also the connection to my motherboards headers are extremely loose, when I blow out my pc with the duster I always have to reattach the wire, I don't know if that's a design flaw in the fan or if they are not the correct connections for my motherboard, I have 2 new extra fans but don't have them installed as I don't have any more fan headers and I have no idea if they make something to turn say 2 connections into 1 so 2 fans per header or even if I can do that without burning up something idk, I have seen fans that can be daisy chained together but again I don't know if those go to the motherboard or a psu connection or how they hook up, I know I want to add more fans my room gets pretty warm even with ac and 3 fans isn't enough so what can I do/how do I add more fans up top without more areas to connect them?
if I have to switch fan brands/models for daisy chaining I will I just need to make sure they are compatible with my rig/mobo/psu
When I do add more fans should I go 3 up top so I'll have 5 inlet and one exhaust or should I flip the rear around top make a third inlet and exhaust it the top 3? Like what config would I go for
As far as cpu cooler goes I'm not looking to spend a huge amount as I'm upgrading to a 5900x, a new motherboard and case after I get my surgery if funds permit and this pc will be used to stream (capture from main pc) like a dual pc setup I did see the noctua downdraft (low profile) cooler which I was told as my mobo is pretty cheap and doesn't have vrm heatsinks it would cool the vrms as well but I dont know if that cooler will clear my ram I have 4 8gb sticks of trident neo so I'm looking for recommendations on a decent but not break the bank cooler, that money will be going for the nh14 in the new build when I can get it.
So I'm just trying to figure out how to add more fans to the top of my case as it has a spot for them with a mesh screen magnetic cover, that has to be compatible with my motherboard /psu, what config I should run (5 inlet 1 exhaust or 3 and 3)
looking for a cpu cooler that will keep my cpu cool (not watercooled) that's not going to break the bank ill get MX blue thermal paste for the computer store to use they use cheap paste which I don't want.