Changing the multiplier using the golden bridges

[Guest]

I have a TB 800 that I've been trying to oc to 933 by using the 7x133 setup. I have boosted voltage to 1.85volts and have attempted to modify L6 to change the default multiplier to 7, without changing the other golden bridges L3, L4. I was told this should work but the computer will not even post or give me video. Any suggestions about what to do with the bridges would be appreceiated, because my motherboard does not have multiplier adjustments. But does have the KT133A chip set.

 

[Guest]

Read this article;

http://www.anandtech.com/showdoc.html?i=1440icle

>VIA's KT133A - Overclocking w/ the 133MHz FSB: The "Issue" -<

It addresses the issues with using a 133 FSB with a chip designed for a chip 100MHz FSB

1.11G DURON air cooled!<P ID="edit"><FONT SIZE=-1><EM>Edited by fww56 on 03/30/01 07:26 PM.</EM></FONT></P>

 

[Guest]

That is where i got my origanal info i tried changing the L6 bridges but it won't boot if i cahnge the multiplier to 7 instead of 8.