[SOLVED] Clone? Or reinstall (latest clean install of windows is 4 days old)

pianodomkop

Distinguished
Dec 11, 2013
63
0
18,640
Hello everyone,

I did a clean install of my windows a couple days back, I upgraded to W10 for the newest AMD drivers. Today, I got an SSD for my birthday. Can I clone it to the SSD? There's barely old files to clean up anyways. Or should I still go for the clean install again?

Thanks in advance!
 
Solution
But if you really want...cloning:

-----------------------------
Specific steps for a successful clone operation:
-----------------------------
Verify the actual used space on the current drive is significantly below the size of the new SSD
Download and install Macrium Reflect (or Samsung Data Migration, if a Samsung SSD)
Power off
Disconnect ALL drives except the current C and the new SSD
Power up
Run the Macrium Reflect (or Samsung Data Migration)
Select ALL the partitions on the existing C drive
Click the 'Clone' button
Wait until it is done
When it finishes, power off
Disconnect ALL drives except for the new SSD
This is to allow the system to try to boot from ONLY the SSD
Swap the SATA cables...

USAFRet

Titan
Moderator
While cloning is pretty easy, for a 4 day old install with nothing in it, I'd just do a clean install on the new SSD.
 

USAFRet

Titan
Moderator
But if you really want...cloning:

-----------------------------
Specific steps for a successful clone operation:
-----------------------------
Verify the actual used space on the current drive is significantly below the size of the new SSD
Download and install Macrium Reflect (or Samsung Data Migration, if a Samsung SSD)
Power off
Disconnect ALL drives except the current C and the new SSD
Power up
Run the Macrium Reflect (or Samsung Data Migration)
Select ALL the partitions on the existing C drive
Click the 'Clone' button
Wait until it is done
When it finishes, power off
Disconnect ALL drives except for the new SSD
This is to allow the system to try to boot from ONLY the SSD
Swap the SATA cables around so that the new drive is connected to the same SATA port as the old drive
Power up, and verify the BIOS boot order
If good, continue the power up

It should boot from the new drive, just like the old drive.
Maybe reboot a time or two, just to make sure.

If it works, and it should, all is good.

Later, reconnect the old drive and wipe as necessary.
Delete the 450MB Recovery Partition, here:
https://social.technet.microsoft.co...thy-efi-system-partition?forum=w8itproinstall

Ask questions if anything is unclear.
-----------------------------
 
Solution