Closing L1 bridges with a HB crayon!

[Guest]

Did anybody try closing the L1 bridges on their Athlon or Duron with a HB crayon and succeeded. This guy did
http://www.dansdata.com/socketas.htm

 

[Guest]

We all did, I suppose..... It's great....

 

[Guest]

Crayons...aren't they those wax things that you used to draw with in primary school...personally I used a 5mm mechanical pencil, probably HB but I suppose any softness of lead would work. If this guy did it with a croyon, I wonder what people will try next...maybe a felt tip pen would work too, or tipp-ex....

DESIGN TEAM.

 

[girish]

does a 2B 0.3 mm drawing lead work?

girish

 

[Guest]

Crayons, pencils, whatever.... "HB" is a standard for lead/graphite pencils.... that's what we'll use when colouring in the L1 bridges.... not the wax-stuff, off course LOL...... But: if anyone tried it with, let say, typ-ex, paint or some'else... and it worked, we'd like to know off course 😉

Colour away.....

 

[mpjesse]

I used a piece of my wife's hair to close the bridges. Hehe.

-MP Jesse

 

[Guest]

I couldn't get a conductive pen soon enough to suit me so I went to an auto parts house and got a repair kit for rear window defoggers, applied it with the edge of an E-XACTO knife, worked great, and I don't have to worry about it breaking down like you do with graphite.

DURON 600 @ 1016MHz (107*9.5)
large heat sink and fan, two case fans
ASUS A7V motherboard
256MB PC133 SDRAM
20.5WD 7200rpm hard drive
VOODOO-3 3500 video w/TV tuner
SOUND BLASTER LIVE! PLATINUM
52x CDROM
12/10/32A PLEXTOR CDR/RW
10/100 NIC
56K MODEM
on a network w/cable modem. runs great! almost too easy

 

[Guest]

You are so lucky

My Duron 650 only got 900 at A7V max Vcore 1.85 software reading 1.888V

If I dare enough I will do the toms surgical thingy, but not yet, anymore tips would be great.

at 950 only POST 🙁

Best regards
cx5