Hi guys,
I found various threads here with the exact trouble that I am facing up with now. After re-setting up my mainboard (for cleaning up), I loaded 2 RAM to the last place it was (1 - 3) and it couldn't boot up even to the bios screen. Going to 1-2 is fine but it shows up Single Channel boosting only when fetch up from CPUz. 1 RAM is also ok but if only not to use the 3 OR 4 slot.
I have tried all these solutions:
- Clean up the ram and ram slots.
- Upgraded BIOS to latest version.
- Reset BIOS
- Take off the battery for a while then reinstall it and reboot pc.
- Re-arrange the CPU fan a little bit as some said it could take affect on the pins around.
- Remove one or two screws holding the motherboard.
And none of them worked
Here is my specs:
+ Mainboard: Gigabyte Z87X - UD3H.
+ CPU: Intel Core i7 4770k
+ RAM: Cosair Dominator Plantium (8gb x 2).
+ Power: Cooler Master 700w
So any other idea?
Thanks a lot...
I found various threads here with the exact trouble that I am facing up with now. After re-setting up my mainboard (for cleaning up), I loaded 2 RAM to the last place it was (1 - 3) and it couldn't boot up even to the bios screen. Going to 1-2 is fine but it shows up Single Channel boosting only when fetch up from CPUz. 1 RAM is also ok but if only not to use the 3 OR 4 slot.
I have tried all these solutions:
- Clean up the ram and ram slots.
- Upgraded BIOS to latest version.
- Reset BIOS
- Take off the battery for a while then reinstall it and reboot pc.
- Re-arrange the CPU fan a little bit as some said it could take affect on the pins around.
- Remove one or two screws holding the motherboard.
And none of them worked
Here is my specs:
+ Mainboard: Gigabyte Z87X - UD3H.
+ CPU: Intel Core i7 4770k
+ RAM: Cosair Dominator Plantium (8gb x 2).
+ Power: Cooler Master 700w
So any other idea?
Thanks a lot...