COMPUTER STUCK AT AMERICAN MEGATRENDS AND IT DOESNT SHOW “F1” to enter BIOS

Sep 20, 2018
2
0
10
0
It doesn’t recognize my driver when it lists my parts. I have a prime b350-plus motherboard.

It says “USB Dvice Over Current Status detected ! !”

I had unplugged everything in the back except for monitor and keyboard.

I have also taken out the cmos battery and tried the reset clock thing by putting my screw driver on the pins to short it (manual instruction) ( it doesn’t have the jumper 3 pins only 2 pins).


Please help thank you!


Here is a link to the photo in my discord

https://discord.gg/uuGSxgv
 
Overcurrent can show in 2 cases;
1. Missing clip,like for clearing cmos, usually for chassis fan or for usb.
2. Usb is shorted, either back or front panel.

Note 1. I had this issue cause i removed that clip and showed me overcurrent even tho it was not shorted, and mobo served me 8 long years and srill works fine.
 
Sep 20, 2018
2
0
10
0


What do I do if they are mangled and touching each other?
 

Karadjgne

Titan
Herald
Boot with just the mouse, see if it gets past that point. Boot with just the keyboard. Many times that error pops up because there is a short in the USB cable, usually right at the edge of the connector where the stress relief chunk of rubber is.
 

ASK THE COMMUNITY

TRENDING THREADS