In the board look for PANEL 1im battling to connect the power switch to my motherboard NCR Pocona D-NR6-D-021 V1.0
the headers on this board dont look like that its a 10 pin which the 3 pin is missingLook for the front panel header on the motherboard.
It will look like this:
https://www.google.com/imgres?imgurl=https://www.clubedohardware.com.br/uploads/monthly_2019_10/image.png.b39de09af08f94846f0b38504eef92bc.png&imgrefurl=https://www.clubedohardware.com.br/forums/topic/1401880-conectores-da-placa-m%C3%A3e-ncr-pocono-d-nr6-d-021-v-10/&tbnid=d5mbj33Lqa45cM&vet=12ahUKEwiLmI6ln6_rAhWbVzABHfA-CeQQMygMegUIARC2AQ..i&docid=Q3npNEaTlq57cM&w=215&h=234&q=Pocona D-NR6-D-021 V1.0 manual&client=firefox-b-1-d&ved=2ahUKEwiLmI6ln6_rAhWbVzABHfA-CeQQMygMegUIARC2AQ
It looks to be located one up from the bottom on this image:
https://picclick.com/NCR-Pocono-D-NR6-D-021-Motherboard-402320845535.html#&gid=1&pid=1
The power pins are not polarity sensitive,
The hdd and pwr led pins are polarity sensitive.
Usually, the plain common colored leads are ground.
There is no problem if you connect them backwards, the led's simply don't work.
No damage will occur.
the headers is a 10 pin which the 3 pin is missing my brother in law tried to help but failedIn the board look for PANEL 1
. PIN 4 AND PIN 9 ARE SWITCHES
wen u put the power plug in then a red light comes on and the pc turns on automatically even though the jumper in on the disable part.I got boards like that one, i put them on by pin 4(opposite pin 3 blank) and pin 9.Does the board show red light wen, wen psu is connected.
Oky good. Good to bios under chipset settings, choose south bridge. U will see option about restoring power after power loss. Set it to no to power.wen u put the power plug in then a red light comes on and the pc turns on automatically even though the jumper in on the disable part.
OK thank you I'll try wen I get home tonight and about the power switch ca I put it on 4and 6 pinOky good. Good to bios under chipset settings, choose south bridge. U will see option about restoring power after power loss. Set it to no to power.
. No u can't. It doesn't work like that on this one. , do u hv Facebook or watsapp. I was gonna send u a videoOK thank you I'll try wen I get home tonight and about the power switch ca I put it on 4and 6 pin
You need to separate power switch connectors so tht u would be able, to connect one at 4 and one at 9. No u can't. It doesn't work like that on this one. , do u hv Facebook or watsapp. I was gonna send u a video
Whats app 0732852738. No u can't. It doesn't work like that on this one. , do u hv Facebook or watsapp. I was gonna send u a video