CPU PROBLEM

[Guest]

HI
I HAVE A P2 350 MHZ TODAY I DIASSAMBLED IT SO THAT I COULD CLEAN IT WITH A SOFT BRUSH FROM DUST ,I REASSAMBLED IT AGAIN AS IT WAS BUT WHEN THE CPU STARTED DOING THE TEST THIS MESSAGE CAME OUT:

"EVENT LOG MESSAGES,ENTER SETUP TO VIEW
ERROR
02B2:INCORRECT DRIVE TYPE-RUN SETUP"

I TRIED TO ADJUST THINGS FROM BIOS BUT I THINK SOMETHING IS MESSY
IF I PRESS F1 TO CONTINUE WINDOWS STARTS BUT WHEN I REBOOT THE SAME THING HAPPENS AGAIN
CAN SOMEONE TELL ME WHAT TO DO TO FIX THE PROBLEM
THANKS
ANTVEL@YAHOO.COM

 

[camieabz]

Try an auto-detect in the CMOS set-up.

<b><font color=blue>~scribble~</font color=blue></b>

 

[MeTaLrOcKeR]

Go into the Bios and hit enter on Auto-Detect IDE Drives.......if there is an LBA Mode when it asks you to select the type you want, choose LBA.....than SAVE AND EXIT......

-MeTaL RoCkEr

<A HREF="http://www.anandtech.com/mysystemrig.html?id=13597" target="_new"> <b> My Rig </b> </A>

 

[girish]

well, reset the BIOS and set all Hard drives to Auto detect.

probably you connected the drives to different connectors while reassembling.

<font color=red>No system is fool-proof. Fools are Ingenious!</font color=red>

 

[FatBurger]

PLEASE DO NOT YELL!!!

We're all standing right here, we can hear you perfectly

<font color=orange>Quarter</font color=orange> <font color=blue>Pounder</font color=blue> <font color=orange>Inside</font color=orange>

 

[girish]

antvil, keep down the Caps Lock pls!

<font color=red>No system is fool-proof. Fools are Ingenious!</font color=red>

 

[FUGGER]

When pulling the PCI cards you reset the BIOS, GG

Go thru your bios settings again. all will be ok.

Autodetect the hard drives