[SOLVED] CPU Running Hot Under Heavy Load

[SSFX]

Hi hello

My i5-4690 non k been running hot lately, like 70-72°C under heavy load, idle temps were fine, around 30-40°C. The fan doesn't ramp up, it's stuck at 1.4k RPM, i was concerned that it'll shorten my cpu's life.

My setup:
i5-4690, 3.5 - 3.9 Ghz
Cooler Master i70c (4 pin)
ECS H81H3-MV
8GB DDR3 1600MHz RAM
GPU 1 Palit GTX 970 JETSTREAM, 76°C at full load
GPU 2 Zotac GTX 1060 6GB
WD Caviar Blue 500GB 7.2K RPM
FSP RAIDER 550W 80+ Bronze

Digging around BIOS i found Smart Fan Control, there are 4 preset, Normal, Manual, Quiet and Silent.

Current settings:
Smart Fan Control ENABLED
Smart Fan Mode NORMAL
Smart Fan Start PWM Value 180
Smart Fan Start Temp (DTS) 70
DeltaT +3
Smart Fan Slope PWM Value 10 PWM Value / Unit
CPU Fan Full Speed Offset (DTS) 77 <- I can't change this manually unless i use existing preset = Normal, Quiet and Silent

HWMonitor Shows Fan Control Speed 0.0%

Anybody here knows how to tweak those settings so my fan will keep the cpu cool? Like below 65°C under heavy load? I have no idea how to do it.

Thanks

 

[NightHawkRMX]

None of those temps are dangerous.

 

[SSFX]

None of those temps are dangerous.

Oh well, i m just worried. Should i get a new cooler then?
Btw, is it safe to set gpu fan speed to "auto" in MSI Afterburner, my gpu fans doesn't start spinning unless it reaches 60°C, i find 76°C is pretty hot.