OK, so I bought an i7 4970k and at first I noticed a HUGE improvement over my last proc (fx 8350) The problem is it has been running really high temps (like 65* at idle) I took of my cooler (corsair h80i) that I took of my old cpu, and tried to clean it and add some more thermal paste. Well while cleaning it i must of messed it up, because it would no longer work and computer wouldn't boot. I put the stock cooler on, and at first it worked (about 40* at idle) but then the temps shot up when I rebooted. I noticed that I bent one of the connectors when I put it on (did it at 3:30am, must of not done it right) so I took it off. I also noticed that the thermal grease that comes pre-applied wasn't enough to cover cpu. So I happend to have a cooler master vortex plus in an un-opened box in my closet and I put that on, taking care to put an even thin layer of thermal grease onto the heatsink using a credit card.Now temps are like 40-55* on idle. (this is after i turned of turbo core, and turned the voltage to adaptive. I left my computer running last night and when I woke up it had shut down in the middle of the night for some reason. When I fired it up, everything had slowed down to a crawl. Literally, it took me like two minutes to open Google Chrome. Both Ram and CPU are at low usage, and running at normal speed. I was going to wait until I bought new CPU cooler (Corsair H100i most likely) and check the temps before I considered RMA. Should I RMA the chip now, or is there something else I can try?