Cutting holes in my case

[jammydodger]

Ok so I cut holes in the top of my case so i could fit 2x120mm fans in the top, problem is that I used a hack saw to cut the holes....and well the holes are a bit pants. Does any one know where I could get some kind of power tool that can file down mild steel?

[Insert witty comment here]

 

[Coyote]

Borrow a Dremel (small handheld unit great for polishing, filing and cutting for that matter). There everywhere

Good Luck

Barton 2500+
Abit NF7-S v 2.0
Maxtor 60GB ATA 133 7200RPM
512MB Corsair Twinx 3200LL
9600 Pro
Enermax Noisetaker 420 watts
Win98SE

 

[jihiggs]

assuming pants means bad...
you can get attatchments for power drills that have grining bits on them for that.

wpdclan.com cs game server - 64.246.52.144:27015
now featuring (optional) cheating death!

 

[Crashman]

A die grinder would be perfect, but lacking anything that powerfull a Dremel tool is a good substitute.

You could use a grinding tool on a drill, but the slow speed would result in a rougher edge.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

 

[jammydodger]

Ok, I will have a look on screwfix.co.uk tonight to see if I can get hold of any of these.

[Insert witty comment here]