DDR ram

[BAB_25]

I just got a new 1gb stick of ram witch is PNY DDR PC3200 compatible with 400MHz,333MHz,and 266 MHz.Put it in my pc and had to take out my both old samsung 512MB sticks for it to work I have a MSI MS-6702 motherboard -supports three 184-pin DDR SDRAMs up to 2GB memory size.supports 400MHz,333MHz,and 266 MHz DDR SDRAM.Note😛C3200 (400) maximum 4 banks (2 double-sided) only. ANY HELP WOULD APPRECIATED! THANK YOU FOR YOUR TIME.
How do I get my pc to work with the 1gb and one 512mb stick in it or all three.

 

[Herr_Koos]

You wrote a whole paragraph but never actually asked a question. What is the problem?

 

[mi1ez]

go into the BIOS and set the speed to the slowest of the three sticks. if this isn't an option in your BIOS, you need three sticks of the same speed.

 

[BAB_25]

You wrote a whole paragraph but never actually asked a question. What is the problem?

How do I get my pc to work with the 1gb and one 512mb stick in it or all three

 

[BAB_25]

go into the BIOS and set the speed to the slowest of the three sticks. if this isn't an option in your BIOS, you need three sticks of the same speed.

Not an option.

 

[mi1ez]

in that case it looks like you need to make sure all 3 sticks are of the same speed and possibly timings.

 

[BAB_25]

in that case it looks like you need to make sure all 3 sticks are of the same speed and possibly timings.

What you are saying is if they are not the same speed they will not work and if so can you post a link for compatible ram.I don't know what you mean by timing.

 

[whooleo]

Some different brand sticks have compatibility problems with each other, to ensure 100% compatibility get the same brand and speed and timings.

 

[BAB_25]

Best answer selected by BAB_25.