I have had a DFI Lan Party Pro 875B MB for a while now that has been nothing but trouble from day one. I managed to get it to be functional for several months, but now it is back to it's old ways again. Every so often it wants to just go through a BIOS update, and it's stuck in that mode again. The worst part is that even if I stick a floppy with the data on it, the award flash program comes up, asks for the file name for the update, but I can't type anything. Keyboard COM is dead. So the system just sits there forever waiting for data I can't give it.
So here's the deal. I've had enough of this crap. I want to rip this board out so I can have the pleasure of smashing it with my hammer into an unknown number of pieces. However, I have a RAID 0 setup using the built-in Highpoint 372N controller. I need to know what other MB manufacturers use this chip so I can just put the drives into a new system and be able to directly access the existing data on the drives. I'll assume for the moment that as long as I use the same controller on a different make MB, I should be able to do this, right?
So who else makes a MB with the same controller that I can use with these drives? Hopefully MSI does, as I've had good experiences in the past with them (at least with Athlon systems), but I'll welcome others. I'm using a 3.2 gig Prescott furnace and 2 gigs (4x512)of Geil Golden Dragon ram.
I really need help right now. I need to be able to both preserve the data on this RAID and have the pleasure of smashing this board to pieces. Thanks for any help with this.
So here's the deal. I've had enough of this crap. I want to rip this board out so I can have the pleasure of smashing it with my hammer into an unknown number of pieces. However, I have a RAID 0 setup using the built-in Highpoint 372N controller. I need to know what other MB manufacturers use this chip so I can just put the drives into a new system and be able to directly access the existing data on the drives. I'll assume for the moment that as long as I use the same controller on a different make MB, I should be able to do this, right?
So who else makes a MB with the same controller that I can use with these drives? Hopefully MSI does, as I've had good experiences in the past with them (at least with Athlon systems), but I'll welcome others. I'm using a 3.2 gig Prescott furnace and 2 gigs (4x512)of Geil Golden Dragon ram.
I really need help right now. I need to be able to both preserve the data on this RAID and have the pleasure of smashing this board to pieces. Thanks for any help with this.