[SOLVED] Do I need to change my PSU ?

[azvi]

Hello Friends.
Recently I got a Zotac RTX 3070Ti Amp Holo Extreme gpu. I had met all the requirements to run the GPU in its potential. But one major thing which is troubling me is my Coolermaster "MWE" 750W -Gold PSU. It has only 2 cables for the GPU (2+6 Pin) but on the same respective wires there is one more (2+6 Pins) connected to each cable. CM website says that it can run 2 GPU's in SLI, but I need 2 x 8-pin plus 1 x 6-pin to power up my GPU.
Hence please suggest if the consecutive wires of 6-pin can be used or not.


Please reply as I only bought this good & and expensive PSU a few months back.

Thanks & Regards
Azvi

 

[Fix_that_Glitch]

Use the two 6+2 main pcie cables, then the cable that is plugged next to the 6 pin port use it's attached 6 pin cable.

 

[azvi]

Use the two 6+2 main pcie cables, then the cable that is plugged next to the 6 pin port use it's attached 6 pin cable.

Thank You Bro.. for your help. I will be doing this.