Question Docp crashes my computer

[Brady_b88]

I just recently bought 32GB of 3200 DDR4 (Gskill Ripjaws V) to go with my Ryzen 7 3800x and Asus pro ws x570 ace mobo. I noticed that I was only getting about 2199 MHz instead of the advertised 3200MHz. I did some research and found out I needed to enable the Docp. Upon enabling it my computer would boot loop twice then enter bios in safe mode. The highest I was able to get while manually overclocking it was 2899MHz, not the advertised 3200MHz. My workload mainly consists of high-quality video editing so I need that speed. Does anyone have any tips to get it to run that speed or something similar? Thanks in advance.
-Brady

 

[rgd1101]

was the ram on the qvl list for the motherboard?
see there lot of issue on the forum about ripjaws v on ryzen system

 

[Brady_b88]

was the ram on the qvl list for the motherboard?
see there lot of issue on the forum about ripjaws v on ryzen system

I just checked I don’t think that it’s on the list. What should I do?

 

[rgd1101]

did you try this

DRAM Calculator for Ryzen v1.7.3 Download

DRAM Calculator for Ryzen helps with overclocking your memory on the AMD Ryzen platform. It suggests stable memory timing sets optimized for your m

www.techpowerup.com

or might return and get another kit

 

[Brady_b88]

did you try this

DRAM Calculator for Ryzen v1.7.3 Download

DRAM Calculator for Ryzen helps with overclocking your memory on the AMD Ryzen platform. It suggests stable memory timing sets optimized for your m

www.techpowerup.com

or might return and get another kit

I tried that earlier and it still did the same thing. I can’t return because I already painted the heatsink white.