Dos driver for 98SE?

[Crashman]

My SCSI card is supposed to be Win9x compatable, but there are no Win9x drivers! ONly DOS drivers! Am I to assume that during startup the DOS drivers will load and Windows will use them?

Back to you Tom...

 

[Jusphil]

can you load windows with it? i dont see the harm in trying

 

[Crashman]

I don't have the drives yet, I was just wondering.

Back to you Tom...

 

[camieabz]

Maybe its a DOS issue until you get Windows up and running, then you install them in the device manager.

<b><font color=blue>~scribble~</font color=blue></b>

 

[Crashman]

When I tested the card Windows couldn't identify it. I did not install the DOS driver.

Back to you Tom...

 

[Guest]

According to <A HREF="http://www.ami.com/support/doc/Enterprise1400_spec.pdf" target="_new">Your link </A>in your other post, it is only supported by NT4.0/2000 from what I could see. Check again, I could have misread it.

Quote-----------------------------------------
<font color=green>Universal Driver Suite</font color=green>
<font color=blue>Novell® NetWare® 4.2 and 5.x
Microsoft Windows NT™ 4.0/2000
SCO® OpenServer 5.x
SCO
BSDI
FreeBSD
DOS 6.xx
Linux Redhat
Sun Solaris x86 2.6, 7 and 8
IBM OS/2 Warp Server 4 and EBusiness
Win64, Linux64, Monetery When
Launched</font color=blue>
End quote.==================



<font color=orange>Beam</font color=orange><font color=red> me</font color=red><font color=green> up</font color=green><font color=blue> Scotty</font color=blue>

 

[Crashman]

Ahh, but one of the MANUALS says Win95! Which in the case of a hard drive controller usually means Win98 and ME as well.

Back to you Tom...