Hi guys,
I just buyed a new samsung http://www.komplett.dk/k/ki.aspx?sku=640589#extra with a 1 x DVI-D (digital) - 24-pin digital DVI
connection: am using a single link Dvi-d with lower pin since they did not inclucded a 24 dual link with the monitor.
My question is after reading 1 x DVI-D (digital) - 24-pin digital DVI http://en.wikipedia.org/wiki/Digital_Visual_Interface
Example display modes (dual link):
QXGA (2,048 × 1,536) @ 75 Hz with GTF blanking (2 × 170 MHz)
HDTV (1,920 × 1,080) @ 85 Hz with GTF blanking (2 × 126 MHz)
WUXGA (1,920 × 1,200) @ 120 Hz with CVT-RB blanking (2 x 154 MHz)
WQXGA (2,560 × 1,600) @ 60 Hz with GTF blanking (2 × 174 MHz) (30-inch / 762 mm Apple, Dell, Gateway, HP, NEC, Quinux, and Samsung LCDs)
WQXGA (2,560 × 1,600) @ 60 Hz with CVT-RB blanking (2 × 135 MHz) (30-inch / 762 mm Apple, Dell, Gateway, HP, NEC, Quinux, and Samsung LCDs)
WQXGA (2,560 × 1,600) @ 60 Hz with CVT-RB blanking (269 MHz) (This is for high end monitors when operating at greater than 24 bits per pixel.)
WQUXGA (3,840 × 2,400) @ 33 Hz with GTF blanking (2 × 159 MHz)
Question: Am currently only doing 60 hz on 1,920 × 1,080 with my single link kabel... If i buy a dual link 24 pin dvi-d kabel will i be able to do more hz? i have a 6850 oc v. card.
I just buyed a new samsung http://www.komplett.dk/k/ki.aspx?sku=640589#extra with a 1 x DVI-D (digital) - 24-pin digital DVI
connection: am using a single link Dvi-d with lower pin since they did not inclucded a 24 dual link with the monitor.
My question is after reading 1 x DVI-D (digital) - 24-pin digital DVI http://en.wikipedia.org/wiki/Digital_Visual_Interface
Example display modes (dual link):
QXGA (2,048 × 1,536) @ 75 Hz with GTF blanking (2 × 170 MHz)
HDTV (1,920 × 1,080) @ 85 Hz with GTF blanking (2 × 126 MHz)
WUXGA (1,920 × 1,200) @ 120 Hz with CVT-RB blanking (2 x 154 MHz)
WQXGA (2,560 × 1,600) @ 60 Hz with GTF blanking (2 × 174 MHz) (30-inch / 762 mm Apple, Dell, Gateway, HP, NEC, Quinux, and Samsung LCDs)
WQXGA (2,560 × 1,600) @ 60 Hz with CVT-RB blanking (2 × 135 MHz) (30-inch / 762 mm Apple, Dell, Gateway, HP, NEC, Quinux, and Samsung LCDs)
WQXGA (2,560 × 1,600) @ 60 Hz with CVT-RB blanking (269 MHz) (This is for high end monitors when operating at greater than 24 bits per pixel.)
WQUXGA (3,840 × 2,400) @ 33 Hz with GTF blanking (2 × 159 MHz)
Question: Am currently only doing 60 hz on 1,920 × 1,080 with my single link kabel... If i buy a dual link 24 pin dvi-d kabel will i be able to do more hz? i have a 6850 oc v. card.