Question Error 43 with ASUS GeForce GTX 1080 8GB ROG Strix

[Nemesis404]

I got this GPU in a few days ago, and device manager detects it, but has the error message saying "Windows has stopped this device because it has reported problems. (Code 43)". The first time I booted my PC up with the card after installing the drivers and GPUTweakII from the installation disc, I got display for a few seconds, and the resolution was adjusting itself to proper size, but then just went black afterwards, and won't display anything but a black screen. I have tried many kinds of trial and error such as uninstalling the previous drivers I had for my 960 4gb, and disabling onboard graphics, and moving it to the other PCI E slot, but it has not done me justice. If I disable the Radeon R7 Graphics in device manager, I won't receive display from my motherboard. I also can't boot into BIOS and safe mode without the 960, instead of through the motherboards HDMI port. I can't check and see if the BIOS detects the 1080 because all I get for display is a black screen when I turn on the PC.

Processor: AMD A10-7700K APU (4x 3.50GHZ/4MB L2 Cache)

Motherboard: Gigabyte GA-F2A88X-D3H

Memory: G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-1600C9D-16GXM

PSU: 600W Standard 80 PLUS Bronze

https://imgur.com/liZ5TMM

View: https://imgur.com/liZ5TMM

https://imgur.com/kD2onHI

View: https://imgur.com/kD2onHI

https://imgur.com/82NteHD

View: https://imgur.com/82NteHD


The last 2 pics are what my PC looks like from the inside with the 960.

 

[stag1x]

I have the same issue.

Windows has stopped this device because it has reported problems. (Code 43)

 

[Nemesis404]

I was able to reconfigure my BIOS to load through my motherboard instead of the GPU. I even performed a clean installation. Still no luck.