Question Errore XMP nuove RAM

[CR3ATOR3]

Salve community,
oggi ho ricevuto le nuove ram (32gb) ovvero: ADATA XPG GAMMIX D10 Desktop PC Memory PC4-28800 DDR4 3600MHz 16GB x 2 Nero
sostituendole con le vecchie da 16 gb 21400mhz(XPG GAMMIX D10). Dopo averle inserite ho notato, tramite gestione attività" e bios" che sono impostante a 2666 mhz quindi ho abilitato XMP per portarle a 3600... però qui mi da il seguente errore: screenshot1

Screenshot2 La mia configurazione (pc)

Configurazione BIOS:
BIOS1
BIOS2
BIOS3
BIOS4

PS: l'errore mi da anche se imposto (nel bios) dram frequency: a 3600mhz




Grazie a tutti per il supporto ^^

 

[MagicSakura]

I went to the Intel website to check your CPU model, it can only support up to 2666MHz, so you can't boot using 3600MHz and was restored back to default settings by the BIOS.

 

[CR3ATOR3]

which cpu do you recommend to buy for my configuration?

I would also like to buy the rtx 4070 gpu

I went to the Intel website to check your CPU model, it can only support up to 2666MHz, so you can't boot using 3600MHz and was restored back to default settings by the BIOS.

 

[MagicSakura]

If you want to use high frequency memory. You can refer to the following maximum frequencies supported by the CPU.
i7-10700K DDR4-2933
i7-11700K DDR4-3200
i7-12700K DDR5-4800 or DDR4-3200
i7-13700K DDR5-5600 or DDR4-3200
These are the maximum memory frequencies that the CPU can support by default. If your MoBo supports higher frequencies, you can try overclocking.

 

[Zerk2012]

If you want to use high frequency memory. You can refer to the following maximum frequencies supported by the CPU.
i7-10700K DDR4-2933
i7-11700K DDR4-3200
i7-12700K DDR5-4800 or DDR4-3200
i7-13700K DDR5-5600 or DDR4-3200
These are the maximum memory frequencies that the CPU can support by default. If your MoBo supports higher frequencies, you can try overclocking.

Everything you said is wrong the stated speed means nothing.
Mine says 2666 set XMP and 3200 runs just like it should.

 

[Zerk2012]

which cpu do you recommend to buy for my configuration?

I would also like to buy the rtx 4070 gpu

Set XMP for your memory then manually change the speed to 3200.
Everything stated above is wrong.

 

[CR3ATOR3]

Set XMP for your memory then manually change the speed to 3200.
Everything stated above is wrong.

then active xmp and set frequency ram to 3200 mhz?



ok it works, thanks

 

[CR3ATOR3]

Set XMP for your memory then manually change the speed to 3200.
Everything stated above is wrong.

if I want to buy the rtx 4070 gpu, which components do you recommend me to upgrade?
would the current cpu be fine?

Mainly I should use the pc for unreal engine (work)... and for fun playing battlefield 2042