Ok so i just tested both of my ram sticks in each slot and i appear to have a faulty ram socket in slot 1. I put both ram sticks into slot 2 individually and it booted fine both times. But whenever i put any of the sticks in slot 1 my pc does not boot. Is there any possible solutions to this other than replacing my motherboard? When both sticks are installed this is what it says in task manager
-------------------------------------------------
Memory
8.0 GB
Speed: 1200 MHz
Slots used: 2 of 2
Form factor: DIMM
Hardware reserved: 4.1 GB
Available 2.0 GB
Cached 1.6 GB
Committed 4.3/12.9 GB
Paged pool 183 MB
Non-paged pool 213 MB
In use (Compressed) 1.9 GB (45.3 MB)
----------------------------------------------------
Specs:
Amd Ryzen 5 2600 6 core processor 3.40ghz
Gtx 1050ti
ASRock A320M-DVS R3.0
Hyperx 2x4GB 1200 MHz
-------------------------------------------------
Memory
8.0 GB
Speed: 1200 MHz
Slots used: 2 of 2
Form factor: DIMM
Hardware reserved: 4.1 GB
Available 2.0 GB
Cached 1.6 GB
Committed 4.3/12.9 GB
Paged pool 183 MB
Non-paged pool 213 MB
In use (Compressed) 1.9 GB (45.3 MB)
----------------------------------------------------
Specs:
Amd Ryzen 5 2600 6 core processor 3.40ghz
Gtx 1050ti
ASRock A320M-DVS R3.0
Hyperx 2x4GB 1200 MHz
Last edited: