Hello group,
Building my first PC, and ran into a problem. Here is my build specs:
Asus Z690-Plus Wifi D4
Intel i7 12700K
Corsair (2x16Gb) CMH32GX4M2E3200C16W
Samsung 970 Evo Plus 2TB
Corsair RM850
MSI 3060ti
BIOS Version: 1720 (August 2022)
I initially replaced the motherboard thinking there was a problem with the B slots, but alas I'm having the same issue I started with. When I place a 2nd stick of RAM into the machine, I get a DRAM error light (Amber QLED). The machine seems like it reboots a few times, eventually stops. When I tried to reset CMOS (unplug the machine, short the jumper, etc) the machine doesn't try rebooting it just goes straight to a DRAM error. I've tried each stick individually and that works, the issue is when I try to add the second stick. My overclocking options are off, and I've tried this with and without XMP enabled. Any ideas? Thanks in advance!
Building my first PC, and ran into a problem. Here is my build specs:
Asus Z690-Plus Wifi D4
Intel i7 12700K
Corsair (2x16Gb) CMH32GX4M2E3200C16W
Samsung 970 Evo Plus 2TB
Corsair RM850
MSI 3060ti
BIOS Version: 1720 (August 2022)
I initially replaced the motherboard thinking there was a problem with the B slots, but alas I'm having the same issue I started with. When I place a 2nd stick of RAM into the machine, I get a DRAM error light (Amber QLED). The machine seems like it reboots a few times, eventually stops. When I tried to reset CMOS (unplug the machine, short the jumper, etc) the machine doesn't try rebooting it just goes straight to a DRAM error. I've tried each stick individually and that works, the issue is when I try to add the second stick. My overclocking options are off, and I've tried this with and without XMP enabled. Any ideas? Thanks in advance!