First time building gaming/editing pc

mariuslol1

Honorable
Dec 2, 2012
37
0
10,530
Hi
I am going to build a pc for the first time. I am going to use it mostly for video editing, 3d rendering and gaming. I was wondering if these specs will work well for the purpose and if everything will fit together:

CPU: Intel Ivybridge i7-3770k 3,5GHZ. Boost to 3,9GHZ.

Motherboard: ASUS SABERTOOTH Z77

Graphics card: ASUS GTX680 2GB PCI-E

Ram: Kingston HyperX Predator 16GB DDR3

PSU: Fractal Design Integra R2 750W

Cooling: Corsair Cooling Hydro Series H80

SSD: Crucial v4 256GB SATA 6Gb/s

Tower: Antec Three Hundred TWO

Will all of this fit together, and will it be good for gaming/editing?
Would it be possible to run BF3 at ultra settings? :D
 

excella1221

Honorable
Aug 23, 2012
2,415
0
12,160
Everything should fit, but a few comments here.

- Sabertooth is an overpriced gimmick, it's basically the ASUS P8Z77-V PRO and the ASRock z77 Extreme6 minus the thermal armor that actually adds up to temps, ironically.
- RAM looks... weird.. and overpriced at that. Get low profile RAM like Corsair Vengeance LP or G.Skill Sniper/Ares.
- Forget the H80, the extra cost and risks in leaking isn't worth it. High-end air coolers like the NH-D14 and Silver Arrow will outperform it.
- The 680 is an overpriced card as well, you're basically paying ~$100 for a 5% increase in performance from the 670. Just get a 670 and OC it a bit, I suggest getting the Gigabyte.
- the V4 series of Crucial has been met with a lot of negative feedback mostly in reliability and quality. I suggest the M4 series if you want to stick with Crucial. Alternately, you can get the Vertex 4 or Samsung 830/840 Pro SSDs which are better.
 

mrdowntownkiller

Honorable
Sep 14, 2012
725
0
11,060

you said all the things i wanted to say :)
one more thing if you'r not going to overclock and rely on the boost option then forget the aftermarket coolers , also get a modular psu ( seasonic , xfx , corsair ) preferred .
 

mariuslol1

Honorable
Dec 2, 2012
37
0
10,530
I'm going to use After Effects and Sony Vegas Pro for compositing and 3ds Max. I am going to do some advanced reflections and simulations in 3ds max, so it will be a lot of time rendering.
 

mariuslol1

Honorable
Dec 2, 2012
37
0
10,530


Thanks.

Would you recommend the ASUS MAXIMUS V FORMULA motherboard?
And would the Be-Quiet Dark Rock Pro 2 be a good cooler?
I am going for the Corsair Vengeance LP ram, the gtx 670 and the m4 ssd.
 

excella1221

Honorable
Aug 23, 2012
2,415
0
12,160
No, not really. Only if you'll need the extra PCI-E 3.0 for 3-way SLI/Crossfire.
Lots of onboard stuff that the ASRock Extreme6 has and the Formula doesn't, it doesn't have any PCI slots at all, and the only advantage I can see is a Bluetooth and Wifi onboard but you can get those for like $10-15 each.
http://www.newegg.com/Product/Productcompare.aspx?Submit=ENE&N=100006654&IsNodeId=1&Description=asrock%20z77&bop=And&CompareItemList=-1%7C13-131-854%5E13-131-854-TS%2C13-157-295%5E13-157-295-TS

Get the 212 EVO, best performance for the money.
 

I guess you don't understand the fundamentals of RAM speed... your comment would actually matter if the speed was 1333 or even 1600 - and can you explain why the voltage is "pretty bad"?
 

excella1221

Honorable
Aug 23, 2012
2,415
0
12,160
The 2nd RAM suggestion... I find it really impractical to invest in that - there's little to no difference between 1600MHz of RAM and 2400MHz in gaming, maybe 0-2 fps at most. As for the media creation, it should show a difference in performance, but minimal and imo doesn't justify the near $200 price tag.

Regarding the 1.65v thing, Intel has decided to void CPU warranties for anything going over 1.5v since it strains the processor's memory controller and causes instability.