Folding@Home: THGC Needs You -Team 40051

[Mousemonkey]

Okay guys it's on! From Thursday December the 1st until December the 7th we will be in competition mode.

Feel free to recruit by any and all means possible.


Hopefully a News Article will be up soon so we will have a link that we can spam the forum with!

 

[Unolocogringo]

Picked up a Asus Dual 1070 today and installed it a few minutes ago.
Should help out a bit.

Estimating 515,877PPD with a boost clock of 1978mhz. so far so good.
GO TEAM!!!!!

 

[Unolocogringo]

Okay guys it's on! From Thursday December the 1st until December the 7th we will be in competition mode.

Feel free to recruit by any and all means possible.


Hopefully a News Article will be up soon so we will have a link that we can spam the forum with!

We are all ready. Just need to get the word out for more folders.
So when can I start spamming the forums, without getting banned???

 

[Unolocogringo]

:FAULTY project:13500 run:0 clone:173 gen:38
:FAULTY project:9175 run:0 clone:5 gen:99
Then I get 2 of these. The units downloaded and immediately uploaded.

All of one error in case it is needed to be reported.
00:34:39:WU01:FS01:0x21:Folding@home GPU Core21 Folding@home Core
00:34:39:WU01:FS01:0x21:Version 0.0.17
00:34:45:WU01:FS01:0x21:ERROR:exception: Error downloading array interactionCount: clEnqueueReadBuffer (-5)
00:34:45:WU01:FS01:0x21:Saving result file logfile_01.txt
00:34:45:WU01:FS01:0x21:Saving result file log.txt
00:34:45:WU01:FS01:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
00:34:51:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
00:34:51:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:13500 run:0 clone:173 gen:38 core:0x21 unit:0x000000358ca304f457a35861bd9e484c

And the other one.
00:34:17:WU02:FS01:0x21:Folding@home GPU Core21 Folding@home Core
00:34:17:WU02:FS01:0x21:Version 0.0.17
00:34:24:WU02:FS01:0x21:ERROR:exception: Error downloading array interactionCount: clEnqueueReadBuffer (-5)
00:34:24:WU02:FS01:0x21:Saving result file logfile_01.txt
00:34:24:WU02:FS01:0x21:Saving result file log.txt
00:34:24:WU02:FS01:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
00:34:30:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
00:34:31:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9175 run:0 clone:5 gen:99 core:0x21 unit:0x0000007aab436c6957b24c27a37058de

 

[Unolocogringo]

Problem solved.

Do not upgrade to 375.?? driver versions.
Sorry win 10 users you have no choice in the matter. Besides being the biggest spyware program that exists ,you have no control over driver updates without hacking.

https://foldingathome.stanford.edu/2016/10/27/core-21-openmm-gpu-issues-new-windows-nvidia-drivers-375-57-375-63/

 

[Sakkura]

Okay guys it's on! From Thursday December the 1st until December the 7th we will be in competition mode.

Feel free to recruit by any and all means possible.


Hopefully a News Article will be up soon so we will have a link that we can spam the forum with!

December 7th... Anandtech will live in infamy.

 

[beanoslim]

Problem solved.

Do not upgrade to 375.?? driver versions.
Sorry win 10 users you have no choice in the matter. Besides being the biggest spyware program that exists ,you have no control over driver updates without hacking.

https://foldingathome.stanford.edu/2016/10/27/core-21-openmm-gpu-issues-new-windows-nvidia-drivers-375-57-375-63/

I'm on 373.06 and Windows 10, no issues.

 

[logainofhades]

Okay guys it's on! From Thursday December the 1st until December the 7th we will be in competition mode.

Feel free to recruit by any and all means possible.


Hopefully a News Article will be up soon so we will have a link that we can spam the forum with!

Changing my thermal pads, on my 780ti, so hopefully that will fix my lockups issue, and I can have it going again, for this. The factory pads looked pretty nasty, after years of folding abuse. :lol:

 

[Titillating]

Hey fellas. I took the liberty of creating a new F@H thread for you guys, all stickified and everything (since this one insists on being stuck, but not in the correct sense). You can find it here: http://www.tomshardware.com/forum/id-3229962/tom-hardware-team-thread.html

 

[Mousemonkey]

Found and soiled it! :lol: Thanks Tits.

 

[lilcinw]

It has only been up for 20 minutes and there are two new potential folders.

Thanks Titillating

 

[warmon6]

http://i.imgur.com/C3TZUkW.png

Lucy im back!

 

[Unolocogringo]

http://i.imgur.com/C3TZUkW.png

Lucy im back!

wooooo hooooo!!!! welcome back!!!!

 

[Mousemonkey]

http://i.imgur.com/C3TZUkW.png

Lucy im back!

Welcome back, I didn't get around to doing the guide updates BTW.

 

[logainofhades]

I have redone the thermal pads, on my 780ti. I have had only one lockup, since. I think it was possibly due to a Win 10 update.

 

[Deleted member 362816]

Hello, I have not folded in awhile. Since 2011

According to my program I should Avg 750k points a day towards Tom's let me know if there is anything I can do to improve it.

Rig is in sig.

 

[Unolocogringo]

Hello, I have not folded in awhile. Since 2011

According to my program I should Avg 750k points a day towards Tom's let me know if there is anything I can do to improve it.

Rig is in sig.

Welcome cia24 !!!
Most of us fold with Nvidia cards but a few run some AMD cards. They will make suggestions shortly.
Thanks for Folding!

 

[Unolocogringo]

Hello, I have not folded in awhile. Since 2011

According to my program I should Avg 750k points a day towards Tom's let me know if there is anything I can do to improve it.

Rig is in sig.

We have a new thread. Can you post there and start putting valuable information there??
You question will get answererd there and help more readers/folders.
Thanks again
Rick


http://www.tomshardware.com/forum/id-3229962/tom-hardware-team-thread.html

 

[willie nugs]

Is this where I post once I've finally made up my mind on which team I'm joining?

 

[Unolocogringo]

Is this where I post once I've finally made up my mind on which team I'm joining?

this is our problematic old thread.
We have a shiny new thread here.
http://www.tomshardware.com/forum/id-3229962/tom-hardware-team-thread.html

 

[doubled]

Sorry, Windows 10 auto updates shut my machines down and I've been to busy to mess with them. Haven't even been on to play BF1. I'll get some hardware rolling....

 

[beanoslim]

Nice to hear from you DD, just in time.

The thread has moved to http://www.tomshardware.co.uk/forum/id-3229962/tom-hardware-team-thread/page-3.html

P.S>You know you can turn auto updates off via gpedit..

 

[doubled]

I just shut off the update service. One is running 1080 running, the other in the AM when I get to work.

 

[beanoslim]

Nice1.

You are still posting in the old thread mate.

Move on over to here - http://www.tomshardware.co.uk/forum/id-3229962/tom-hardware-team-thread/page-4.html