Foxconn N15235 CPUs Supported?

[Jakespeare]

I want to know if I can change out the Pentium on my Foxconn N15235 to a quad core CPU.
I trie looking for a data sheet with supported models for this mobo, and found none, can you guys help?

 

[Deleted member 217926]

Is this your motherboard?

http://www.foxconnchannel.com/product/motherboards/detail_spec.aspx?ID=en-us0000319

That came up when I googled it. If that is it then yes it supports the entire LGA775 processor line. Including the 8xxx and 9xxx series of quads.

 

[Jakespeare]

It is not the same on the picture. The USB ports are placed differently, and there are too many. Also mine has no printer port as this one does.

 

[Deleted member 217926]

What chipset is in your board? CPU-Z will tell you.

http://www.cpuid.com/softwares/cpu-z.html

 

[Jakespeare]

Is this what you need?

 

[johnend]

It is not the same on the picture. The USB ports are placed differently, and there are too many. Also mine has no printer port as this one does.

near your memory is a label it is your foxconn m/b model
eg p4m9007mb-8rs2h

 

[MUKHARJEE]

I want to know if I can change out the Pentium on my Foxconn N15235 to a quad core CPU.
I trie looking for a data sheet with supported models for this mobo, and found none, can you guys help?

 

[ko888]

Manufacturer's motherboard name: Foxconn MCP73M01H1

HP/Compaq name: Napa-GL8E

Form Factor: Micro-ATX: 24.4 cm (9.6 inches) x 24.4 cm (9.6 inches)

Chipset: GeForce 7100/nForce 630i

Front-side bus speed: 800/1066/1333 MHz (processor dependent)

Processor upgrade information
Socket type: 775
Motherboard supports the following processor upgrades
• Intel Core 2 Duo (Wolfsdale) E8xxx
• Core 2 Duo E6xxx (Conroe) up to E6850
• Pentium E2xxx series (Conroe) with Dual Core technology up to E2160
• Core 2 Duo E4xxx (Conroe)
• Celeron 4xx series (Conroe) up to Celeron 450

The Compaq Presario CQ3080IX Desktop PC uses the MCP73M01H1 (Napa) motherboard and it was sold with an Intel Core 2 Quad Q8200 installed. HP shipped a few PC's with that motherboard with faster quad cores up to the Q9400. You just need to make sure that your BIOS version supports the CPU you want to use before you change the CPU.

Read sumsolstice's reply on the HP Support Forums here:

http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/Can-I-upgrade-to-a-Q9550-on-Napa-GL8E/td-p/515201

 

[Deleted member 217926]

2 year old thread........

 

[ko888]

2 year old thread........

That's what I forgot to check...

 

[Deleted member 217926]

Thankfully this kind of stuff should basically go away with the new best answer system. Mousemonkey went through and closed a whole bunch of my old threads about a year ago and that helped but they still pop up on occasion.