[SOLVED] Front Header doesn't match my motherboard layout.

[viqzz07]

I recently bought an NZXT H510 to replace my old case. Everything was going well until i tried to plug in the front panel cable. It didn't match the pins on my motherboard. Any solutions? Motherboard: Asus Z87 Plus

 

[Ripcorder]

Have you checked the accessories box? That case usually has an adaptor, just in case, which should go onto the end of the Front IO cable

 

[viqzz07]

Have you checked the accessories box? That case usually has an adaptor, just in case, which should go onto the end of the Front IO cable

Oh, found it. tysm

 

[Lutfij]

Welcome to the forums, newcomer!

^ using images 2 for reference, the bottom row are explained, the top left row will be for the LED's. FYI, the GRND is often the -ve terminal. As for your power LED, the left most pin should be the +ve terminal.

^ image used for reference, the same can be found in your motherboard manual, page 2-9.