Question Fujitsu-Siemens Amilo D8830 Overheating or not?

[schiz01q]

Hi.
There are not so much information about this laptop over the net, despite it is very old. So I will be very appreciate if someone who still own this model. For some help.
Here are thermal sensors readings after several hours of browsing, WMP and chat-client in background.

Spoiler

Are them OK or not?
Cleaned all dust from heatsinks several days ago, replaced old thermal compound with Arctic Cooling MX4. Left the old thermal pads of chipset/GPU, I don't think they are became unnefective even after years.

Pentium 4 3.06 HT critical temp is 69°C, so it's a bit scary to have only 10°C gap.

 

[jay32267]

Those temps look OK to me.
Although where are you seeing this 10 degree gap.
That would imply you are running at 59C.
I don't see this.

 

[schiz01q]

That would imply you are running at 59C.
I don't see this.

Right column, historical maximum values.
"Remote" sensor is definitely CPU. Sometimes it even hits 63℃, so the gap is even smaller.

I tested CPU heatsink under hot water, the grill part gets hot immediately after the base. Both pipes at once, so it should be fine.

 

[jay32267]

If that sensor is the CPU.....I wouldn't be concerned if that's as high as it gets. 10 degrees C can be a long way.....and even at 63 I wouldn't be concerned.

Many GPUs and CPUs run within 10 degrees of their max temperature and are fine.