[SOLVED] Gigabyte RX 5700 XT 8G Artifacts

[SilverBullet47]

Hello Every one !
I bought a new AMD RX 5700 Xt 8G , It was causing me randomly restarts , so I decided to replace my PSU . yesterday i was testing the gpu with my new PSU i ran a Furmark test , My computer does not restarts but a new problem shows . (I will Put some pictures) a lot of Artifacts show up on screen and the system became very slow after a couple minutes a Blue Screen show up.

My Setup :
MONITOR : MSI OPTIX MAG24C 144 MHZ (Working on 120 Mhz)
CPU : AMD Ryzen 3600
GPU : AMD RX 5700 XT 8G
MOBO : MSI B450 A pro
RAM : Kingston hyper X fury 2x8 3466 MHz
STORAGE : Kingston SSD480 G
STORAGE : WD 750 NVME 500 G
PSU : AORUS P750W 80+ GOLD Modular

Screen Pictures :

https://imgur.com/a/arSG3Mg

View: https://imgur.com/a/arSG3Mg

 

[Dunlop0078]

GPU temps under load in furmark?

If temps are okay then it's likely a GPU driver issue. Are you running the latest driver for the 5700 xt?

 

[SilverBullet47]

GPU temps under load in furmark?

If temps are okay then it's likely a GPU driver issue. Are you running the latest driver for the 5700 xt?

Temp 88 C 115 Junction i think its normal for the blower edition
I formatted my pc yesterday all the drivers are fresh and clean

 

[Dunlop0078]

I would download msi afterurner or something that will allow you to control fan speed, run the fan at 100% then run furmark and see if it still does it.

You installed the the radeon software and installed the driver trough that? If you didn't the windows install process will likely automatically install a generic video driver or possibly older AMD video drivers.

 

[drivinfast247]

Try reinstalling drivers. if that doesn't fix it then card is toast.

 

[SilverBullet47]

I would download msi afterurner or something that will allow you to control fan speed, run the fan at 100% then run furmark and see if it still does it.

You installed the the radeon software and installed the driver trough that? If you didn't the windows install process will likely automatically install a generic video driver or possibly older AMD video drivers.

I Will try with MSI AfterBurner
I downloaded the last version from the website 20.2.2 before formating my pc and i put it in a flash drive . i plug off the internet cable to avoid any windows update , after formating i used the usb to install the driver

 

[SilverBullet47]

Try reinstalling drivers. if that doesn't fix it then card is toast.

The computer Works fine right now its not a permanent problem after the blue screen yesterday no artifact shows yet

 

[wah007]

Did you get to the bottom of this and find out what caused this?

I have the exact same artifacting on mine, it just randomly appears when using the PC and even on the desktop when moving the mouse, and then it BSOD's.