Question GPU clock speed in state 7 was lower than State 6

[Renz1997]

I recently bought a 2nd hand Sapphire Nitro+ RX580 8gb. At first installation i decided to check the tuning and everything was perfect, but after running test benchmarks like Furmark and Unigine Heaven then checking the tuning again, the State 7 in GPU clock was now lower than state 6.

Here are the details:

State 0 : 300MHz, 750mV
State 1 : 600MHz, 769mV
State 2 : 900MHz, 856mV
State 3 : 1145 MHz, 1100mV
State 4 : 1215 MHz, 1120mV
State 5 : 1257 MHz, 1130mV
State 6 : 1300 MHz, 1140mV
State 7 : 1150 MHz, 1150mV

I had to manually adjust the state 7 to 1340MHz to use my GPUs full potential.

What should I do ?

Thanks 🤘

Edit: Here are my PC specs

CPU : Ryzen 3 3200g
GPU : Sapphire Nitro+ RX 580 8gb
PSU : 500W true rated
RAM : HyperX 8gb 2400mhz x2

 

[helpstar]

eventually the seller flashed a custom BIOS to the card. Check which BIOS version is installed by using GPU-Z

 

[Dj0gany]

Just adjust it manually and save it to a game profile, that should keep state 7 permanently on 1340MHz, unless you wish to change it.

 

[Renz1997]

eventually the seller flashed a custom BIOS to the card. Check which BIOS version is installed by using GPU-Z

I already did. My bios version is listed in techpower up

 

[Renz1997]

Just adjust it manually and save it to a game profile, that should keep state 7 permanently on 1340MHz, unless you wish to change it.

That's what I did. But, is there a problem on my GPU ? Because I think that is not normal.

Sorry I'm just worried, because I live in a country where 18 USD are hard to earn.

BIOS version is fine. I look it up on Techpower up and it's there.

 

[Dj0gany]

That what I did. But, is there a problem on my GPU ? Because I think that is not normal.

BIOS version is fine. I look it up on Techpower up and it's there.

To be honest I don;t know, I would just run it on the above mentioned game profile constantly.

 

[helpstar]

the BIOS version could be the same but could be altered, so flash the original one from techpowerup to your card, and it should work as intended

 

[helpstar]

by the way, in which position is the BIOS switch of this card if it has one for dual BIOS?

 

[Renz1997]

the BIOS version could be the same but could be altered, so flash the original one from techpowerup to your card, and it should work as intended

I'll try. Thank you so much

 

[Renz1997]

by the way, in which position is the BIOS switch of this card if it has one for dual BIOS?

On the left side.

Already tried it though. Still the same

 

[Renz1997]

To be honest I don;t know, I would just run it on the above mentioned game profile constantly.

Thank you for responding.