Question Gpu running hot?

[yoyomeds]

I have been testing my Gpu temps with 3d mark and msi afterburner. I have put my fan speed to max on msi and when running time spy on 3d mark I have been getting around 80 C room temp is around 23 C. Is this an issue and if it is how should I fix it.

My specs: Intel core i7-3770
NVIDIA GeForce 1050-ti
Samsung QVO 1TB SSD
Corsair 16GB (2x8GB) DDR3 1333 MHz

UPDATE: So i replaced the thermal paste inside the GPU and something surprising happened. As I said, the original test showed 80c in 3d mark so today I decided to replace the paste, which was probably very old since it was a used product. The thermal paste in the Graphics card was hard so it took a bit to get it off. But ruining the tests with new paste today showed an interesting result. Average temp at 100% load was down to around 45C and max temp that it reached was about 50C. Shows how much of a difference that thermal paste can make!

 

[kerberos_20]

which 1050ti it is and what power connectors its using
btw 83C is temperature limit, so you still have headroom before gpu will start to downclock (reduce boost clock)

 

[yoyomeds]

There is no power connectors its getting power from the slot, and its an evga dual fan 1050 ti.

 

[NightHawkRMX]

80c is warm but an acceptable temperature for a 1050ti.

I would not change anything unless the temperature goes to 83c and the clockspeed reduces, or the noise gets too loud.

 

[yoyomeds]

80c is warm but an acceptable temperature for a 1050ti.

I would not change anything unless the temperature goes to 83c and the clockspeed reduces, or the noise gets too loud.

ok sounds good

 

[Vic 40]

You could take the side panel off from the case and see if this helps. If so see that you get a better airflow in your case.

 

[yoyomeds]

Updated u guys in the post.

 

[Vic 40]

Well done.